The operating procedures of the electromagnetic iron remover include the following aspects:
1. Installation and commissioning. Before installation, it is necessary to confirm that the power supply of the device meets the requirements. The power cord of the device must be able to withstand the required current and must not be short-circuited or leaked. Before turning on the power, it is essential to check that all wiring is correct and tightened. If the control system has loose wires, it must be resecured. During commissioning, the iron separator must be opened first, and then the conveying device must be turned on to avoid opening the iron separator when the conveying device is not closed.
2. Preparation before operation. Operators must understand and be trained in how the equipment works and how to operate it. Operators must wear personal protective equipment such as hard hats and overalls and ensure that the equipment is intact.
Operating Procedures. 
The operator should be vigilant and observe the working status of the equipment. If an abnormality is found, the operation should be stopped and reported in time. During the operation, the operator should keep his hands dry and avoid touching the electrical components of the equipment to avoid electric shock accidents. During the operation, the operator must maintain a stable emotional and physical state, and it is forbidden to drink alcohol or take drugs while the equipment is working.