X10 NIRALTI32-20 is a superalloy material that is commonly used in applications in high-temperature and high-pressure environments, and its composition meanings are as follows:
x10: Indicates that the material belongs to a specific alloy grade or specification** to distinguish between different materials.
NI: Nickel, nickel is one of the main alloying elements, which can improve the corrosion resistance and high temperature resistance of alloys.
CR: Chromium, chromium has the effect of improving the oxidation resistance and corrosion resistance of alloys.
AL: Aluminum, aluminum can improve the high-temperature strength and oxidation resistance of alloys.
Ti: Titanium, titanium is often used as a strengthening element to help improve the mechanical properties and stability of the alloy.
32-20: Indicates the mass percentage ratio of chromium and nickel in this alloy, i.e., 32% chromium and 20% nickel.
Typical mechanical properties of X10 Nicralti32-20 alloy:
1.Tensile Strength: X10 Nicorlti 32-20 The tensile strength is typically between 600 MPa and 800 MPa in different heat treatment states. After suitable heat treatment, the tensile strength can be further improved.
2.Yield strength: The yield strength of X10 Nicralti32-20 is generally between 300 MPa and 500 MPa, depending on the microstructure of the alloy and heat treatment conditions.
3.Elongation: The elongation of the X10 NIRALTI32-20 is typically between 30% and 50%, which indicates the maximum degree of deformation that can be achieved by the material in a tensile test.
4.Hardness: The hardness of X10 Niralti32-20 is typically between 150 HV and 250 HV, depending on the composition of the alloy, the heat treatment process and the test method.
5.Modulus of elasticity: The modulus of elasticity of X10 Nicralti32-20 is generally between 200 GPA and 220 GPA, reflecting the stiffness and deformation capacity of the material during the elastic phase.
In general, the heat treatment process of X10 NicorTi32-20 alloy includes the following steps:
1.Solution annealing: First, the alloy is heated to the solution temperature and kept warm for a period of time to make the alloying elements in the alloy evenly dissolved in the matrix. Solution treatment helps to improve the plasticity and machinability of the alloy.
2.Precipitation cooling: Starting from the solution temperature, the alloy is rapidly cooled below a certain temperature to promote the formation of the precipitated phase. By controlling the rate and temperature of the pre-cooling process, the microstructure and properties of the alloy can be controlled.
3.Quenching: The alloy is rapidly cooled to room temperature to fix the distribution of the precipitated phase and strengthen and stabilize the alloy.
4.Solution annealing and stabilizing treatment: The alloy is solution treated again and then cooled rapidly to stabilize the microstructure and properties of the alloy.
Here are the common uses of X10 Nicralti32-20 alloy:
1.Petrochemical industry: X10 NIRALTI32-20 can be used to manufacture oil refining units, oil refining furnace tubes, petrochemical equipment and other parts that work under high temperature and high pressure conditions. The alloy has good high temperature resistance and corrosion resistance, and is able to withstand harsh working environments.
2.Chemical industry: In chemical equipment such as chemical reactors, refining furnace tubes, and hydrogenation units, X10 nicralti32-20 alloy is often used to manufacture high-temperature, corrosion-resistant components to ensure long-term stable operation of equipment.
3.Nuclear energy industry: X10 NICORLTI32-20 can be used for nuclear reactor internals, nuclear fuel devices and other nuclear engineering components, because it has good high-temperature radiation resistance and corrosion resistance, which can ensure the safe and reliable operation of nuclear facilities.
4.Aerospace: In applications in high-temperature and high-pressure environments such as aero engines, rocket propulsion systems, and spacecraft components, X10 NicorTi32-20 alloy is commonly used in the manufacture of key components such as blades, nozzles, and combustion chambers.
In general, X10 Nicralti32-20 alloy is suitable for industrial fields that require high temperature, high pressure, high strength and corrosion resistance, and is widely used in the manufacture of high temperature and high pressure equipment and components in various fields such as petrochemical, chemical industry, aerospace, nuclear energy, etc.