1. Preparation 1Tool preparation: wrench, screwdriver, tape, etc. 2.Parts inspection: Ensure that the solenoid valve and the required pipes and fittings are complete and intact. Second, the installation location selection 1Choose the right location: The solar solenoid valve should be installed on the main pipe of the solar system, such as the inlet pipe of the water tank.
2.Avoid high-temperature areas: Solenoid valves should be kept away from high-temperature areas to prevent them from being deformed or damaged by heat. 3. Installation step 1Power outage: Make sure the power to the solar system has been turned off before installation to avoid electric shock accidents. 2.Clean the pipes: Clean the pipes with detergent to ensure they are free of impurities and dirt. 3.Install the joint: According to the need, select the appropriate joint to connect the solenoid valve and the pipe to ensure that the joint is firm. 4.Screw fixing: Use a wrench or screwdriver to fix the solenoid valve in the installation position to ensure that it is secure. 5.Sealing treatment: Use tape and other materials to seal the joints to avoid water leakage. 6.Connect the power supply: Connect the power cord correctly according to the power supply requirements of the solenoid valve.
Fourth, installation and commissioning 1Check the circuit: After completing the installation, carefully check whether the circuit connection of the solenoid valve is correct to ensure that the wrong circuit is not connected. 2.Turn on the power: Reconnect the power of the solar system and observe whether the solenoid valve is working properly. 3.Check the valve: open the water source, check whether the solenoid valve can be opened and closed normally, and ensure that the valve operation is flexible and reliable.
5. Precautions 1Waterproof and dustproof: During the installation process, care should be taken to avoid water and dust entering the inside of the solenoid valve, so as not to affect its normal operation. 2.Regular maintenance: The solar solenoid valve should be cleaned and maintained regularly to keep it in normal operation. 3.Safe use of electricity: During installation and use, it is important to follow the electrical safety specifications to ensure safe use of electricity.