Brush car washing machine installation method Car washing, as a basic part of car maintenance, is essential to keep the appearance of the vehicle clean and prolong the service life.
As an efficient and convenient car washing equipment, brush car washing machine is gradually favored by the majority of car owners.
This article will give you a detailed introduction to the installation method of the brush car wash, help you easily complete the installation of the equipment, and make the car wash easier and faster.
1. Preparation before installation 1Confirm the installation location: Choose a spacious, flat, well-drained site as the installation location of the car wash machine to ensure that the car wash machine will not be obstructed during use.
2.Prepare the tools you need: Prepare the tools you need during the installation process, such as screwdrivers, wrenches, levels, etc.
3.Check the integrity of the equipment: Before installation, carefully check that all parts of the car wash machine are complete and not damaged or missing.
2. Installation step 1Install the base: Place the base of the car wash machine in the selected position, and use the level to adjust the base level.
Then, use screws to secure the base to the ground, making sure the base is stable and not shaking.
2.Install the column: Install the column on the base and fix it with screws.
Make sure the column is vertical and stable.
3.Install the brush device: Install the brush device on the column, pay attention to adjust the angle and height of the brush to adapt it to vehicles of different heights.
Use screws to secure the brush unit.
4.Connect the water source: Connect the car wash machine to the water source to ensure that the water source is sufficient and the pressure is stable.
Install water pipes and water guns to facilitate operation when washing the car.
5.Connect the power supply: Plug the power plug of the car wash machine into the power outlet, make sure the power supply is stable and well grounded.
Be sure to turn off the power switch of the car wash machine before connecting it to the power supply.
3. Inspection and commissioning after installation1Check the stability of the equipment: After the installation is completed, please check whether the various parts of the car wash machine are stable and whether there is any loosening or shaking.
2.Debugging the function of the equipment: turn on the power switch of the car washing machine, check whether the brush rotates normally, and whether the water gun sprays water normally.
If there is any abnormal situation, please adjust and repair it in time.
Fourth, use and maintenance 1How to use: Before using the car wash, remove large pieces of dirt and debris from the surface of the vehicle.
Then, start the car wash machine and adjust the angle and height of the brush and water gun to suit different car models and car wash needs.
When washing your car, keep your vehicle moving slowly to avoid being too fast or too slow to cause a poor car wash.
2.Maintenance: Clean and maintain the car wash machine regularly to ensure that the equipment is in good condition.
Regularly check the wear and tear of the brush, and replace it in time if the wear is severe.
Check the connection of the water source and power supply to ensure that the device is operating properly.
5. SummaryThrough the introduction of this article, I believe you have a detailed understanding of the installation method of the brush car washing machine.
During installation and use, please pay attention to safe operation, follow the instructions for use and maintenance requirements of the equipment.
Hopefully, this article can provide you with useful reference and help when installing and using a brush car wash.
Make car washing easier and faster, and escort your car!