It is well known that all electrical products entering the Australian market must comply with local safety regulations, which is a certification that the industry often faces. Thanks to the mutual recognition agreement between Australia and New Zealand, all products that have obtained Australian certification can be successfully sold in the New Zealand market. All electrical products are subject to Safety Certification (SAA). There are two main types of SAA marks, one is formal recognition and the other is standard mark. The form certification is only responsible for the sample, while the standard mark is subject to each factory audit. At present, there are two ways to apply for SAA certification in China, one is through the CB test report, if there is no CB test report, you can also apply directly.
In various countries, the safety of table lamps is also particularly important, especially in Australia. Australia and New Zealand are mutually recognized, only one product certification can be carried out in the two national markets for sales, import, export and other activities, so it is deeply loved by the majority of foreign trade industries. Australia's standard laws and regulations (i.e. SAA certification) also stipulate detailed instructions for the safety certification of table lamps, and products that do not pass their safety requirements are not allowed to enter Australia.
Applicable standard: AS NZS 605981：2013，as/nzs 60598.2.4:2005+a1:2007
Desk lamp saa process:
1. Fill in the application form.
2. Product sample testing.
3. Product rectification (when the test is unqualified).
4. Issue a report.
5. Report evaluation.
6. Issue a certificate.
What information needs to be provided for the application for SAA certification of table lamp:
1 sample. 2. Circuit schematic diagram (please note that the parameters of the device must be consistent with the nameplate and manual).
3. Printed circuit layout and part location diagram: a product with electronic circuits must be provided; b. If electronic switches, dimmers and other electronic components have been certified, this item can not be provided.
4. English manual (the manual must have the name or trademark of the manufacturer, model, parameters, installation method and necessary safety warnings).
5 Description of model differences (If there are multiple models in the same series, the similarities and differences between the models must be clearly listed.) The declaration must be signed and sealed. ）
6 Label nameplate.
7 Product Installation Structure Diagram ** Diagram (Please indicate the part number and part name of each part.) ）
8. List of key parts (the list must be signed): a format is as follows and the corresponding code in the figure lists each component in turn; bFill in one sheet for each series of products, if a component is only applicable to a specific model, please indicate.
9. A copy of the certificate of important components related to safety (refer to the requirements of the "List of Key Parts" to provide the certificate, and the number on the certificate must be checked, and whether the parameters are consistent with the actual sample.) ）
The following are a few points to pay attention to for table lamp SAA certification, as follows:
The first point: if the lamp product has a power cord, plug, screw lamp holder, bayonet lamp holder, only accept the Australian standards regulations SAA certification, other certifications are not recognized.
The second point: if the desk lamp has an external power supply, the power supply must have a separate SAA certification certificate, and if it is not, it will be regarded as the entire product has not passed the SAA certification.
The third point: mobile desk lamps or lamps must be equipped with power cords and power plugs, which can be tested together with the whole machine.
The fourth point: the table lamp or lamp product model is not too much, once the model is too much, the more likely it is to cause differences in the class table and model differences are difficult to provide and easy to illuminate the requirements to provide all models, and finally lead to the SAA certification certificate is difficult to apply.
Point 5: Before accepting the "SAA certification" of the product, the product manufacturer needs to prepare the product belief information statement and provide it to the laboratory accredited by the SAA certification.
Enterprises will take the cost as a measure when applying for table lamp SAA certification, and the cost of SAA certification for different products is different, so it is necessary to provide detailed information about the product.