1. Drive in a straight line.
Straight line driving is the subject three exam is easy to fail the project, the project requires a hundred meters in front of the completion of straight driving, to keep the vehicle running smoothly, many students mistakenly think that as long as the steering wheel does not move, on the contrary, the test should be controlled in a reasonable range of slight shaking of the steering wheel, in order to ensure the smooth straight line operation of the vehicle.
2. 100 meters plus gear reduction.
Within 100 meters, it is necessary to complete the task of two, three, four upshifts and downshifts step by step, and the vehicle is unstable when shifting, the running speed does not match the gear, and the gear shift is looking down, and the surrounding traffic conditions can not be observed left and right. In the actual test process, the gear shift requirements are in place in one step, and after the broadcast of the previous voice project, immediately step on the accelerator to speed up, do not grind and hesitate, because time and distance are required.
3. Pull over.
When the voice broadcasts to pull over, immediately slow down and change gear, hit the right turn signal to find a suitable parking position, pay attention to the vehicle and the curb line to keep 30 cm, after the vehicle stops, step on the clutch and brake, return to neutral, pull the handbrake, turn off the engine, and close the door after getting off.
In the usual practice, these 3 items should be practiced to achieve technical proficiency, do not be overly nervous during the exam, and operate stably.