The medical device pipeline leak tester is mainly used to detect whether there is leakage in medical devices (such as infusion pipelines, ventilator pipelines, etc.) to ensure their safety and normal operation.
Tubing leak testing is an important quality control procedure used to ensure the safety and effectiveness of medical devices. The operation process of the pipeline leak tester has the following steps:
1.Preparation Phase:
Ensure a good pipeline leak tester.
Make sure the test sample is in good condition.
2.Connecting Tubing:
Connect the test tubing to the test equipment as required.
Check all attachment points to make sure they are tightened correctly.
3.Perform a leak test:
Follow the test equipment's operating instructions to start the leak test.
Gradually increase the pressure and observe the piping system for signs of leakage.
4.Record test results:
Record leaks in the line at different pressures.
5.Next steps:
After completing the leak test, gradually reduce the pressure and disconnect safely.
Clean up the test area to ensure that the device is back to its normal state.
Print data reports, analyze test results, and determine if a sample is qualified.
6.Safety & Maintenance:
Test equipment is calibrated and maintained on a regular basis.
Note: The above is only a simple summary of the operation process of the pipeline leak tester, please refer to the instrument operation manual for the specific operation process, and strictly follow the corresponding safety guidelines.
Pipeline leak tester XL0461-C is composed of a programmable controller, a touch screen, a force sensor, a transmission device, an on-board printer, etc. Designed for the determination of leaks in instrument lines.
The test standard is YY0461-2003 Breathing Circuit for Anesthesia Machine and Ventilator YYT 1543-2017 Nasal Oxygen Tube.
Test pressure output range: 001kpa 30kpa (display), error is not more than 1%.
Resolution: 0001kpa, the error is not greater than the reading of 0002kpa
Test duration: 01s 999min, the error is not greater than 01s。
The leak tester can detect whether the function of the equipment pipeline is intact and ensure the normal operation of medical equipment.
Through the pipeline leak test, the reliability and stability of medical devices can be guaranteed, which helps to improve the quality of medical care.
Tubing leak testers are important for ensuring patient safety, improving the quality of healthcare, saving costs and resources, and complying with regulations. Regular testing of pipeline leaks is one of the important means for healthcare organizations to ensure patient safety, improve medical quality and compliance.
The above information is provided to you by Vixia Technology, and we hope it will be helpful to you.