Silicon porcelain plate decoration construction technology.
As a new type of decorative material, silicon porcelain plate has been widely welcomed because of its unique performance and beautiful appearance. When carrying out the decoration construction of silicon porcelain plate, it is necessary to master certain construction technology and precautions. This article will introduce in detail the construction process of silicon porcelain plate decoration and its precautions.
1. Construction preparation.
Before starting the decoration construction of silicon porcelain panels, it is necessary to make adequate preparations. First of all, it is necessary to ensure that the construction site is clean and tidy, free of dust, oil and other impurities. Secondly, check whether the quantity, specification, and quality of the silicon porcelain plate meet the design requirements. At the same time, it is necessary to prepare the required construction tools and materials, such as silicone porcelain glue, rubber scrapers, plastic scrapers, grinders, etc.
Second, grassroots treatment.
Before installing the silicon porcelain panel, the base layer needs to be treated. For the wooden base layer, it is necessary to carry out moisture-proof treatment first, and ensure that the base layer is flat and not loose. For the concrete base layer, it is necessary to remove the oil, floating ash and other impurities on the surface, and polish it flat. The treated base layer should be dry, oil-free, and kept clean.
3. Elastic line positioning.
According to the requirements of the design drawings, the horizontal and vertical control lines are ejected on the base layer to determine the position of the silicon porcelain plate. At the same time, according to the size and pattern of the plate, draw a dividing line on the base layer to ensure the accuracy and aesthetics of the installation.
Fourth, adhesive preparation.
Silicone glue is an adhesive used to attach silicon porcelain plates. Before use, it needs to be prepared according to the requirements of the instructions and stirred well. At the same time, it is important to ensure that the quality and quantity of the adhesive meet the design requirements.
5. Paste silicon porcelain plates.
When applying the adhesive, make sure that the adhesive is evenly distributed on the back of the silicone porcelain plate and apply the appropriate amount of adhesive to the base layer. Then, gently press the silicon porcelain plate against the base layer to make sure it is flat and free of bubbles. In the pasting process, it is necessary to paste from the center to the surrounding according to the requirements of elastic line positioning, and pay attention to adjusting the angle and position of the plate. At the same time, care should be taken to protect the surface of the plate to avoid scratches or contamination.
6. Special treatment.
For some special cases, special handling is required. For example, when pasting silicon porcelain plates of different sizes, they need to be adjusted and processed according to the actual situation. At the same time, after the pasting is completed, it needs to be trimmed and sanded to make the entire decorative surface more flat and smooth.
7. Precautions.
In the construction process, the following points need to be noted: first, it is necessary to ensure the health and safety of the construction site to avoid cross-contamination and accidents;Secondly, the construction should be carried out in accordance with the design requirements to ensure the accuracy and aesthetics of the installation;Finally, during the construction process, care should be taken to protect the surface of the silicon porcelain plate to avoid scratches or contamination. At the same time, it is necessary to adjust and deal with it according to the actual situation to ensure that the construction quality and effect meet the requirements.
In short, the construction process of silicon porcelain plate decoration needs to master certain professional knowledge and skills, and the construction is carried out in strict accordance with the design requirements. At the same time, it is necessary to pay attention to the safety and hygiene issues in the construction process and protect the surface quality of the silicon porcelain plate. Only in this way can the perfect presentation of the decorative effect of the silicon porcelain plate be ensured.