B R servo drive module fault repair

B&R servo drive module fault repair

B&R servo drive module repair alarm shows 41070 motor overtemperature (temperature model).

B&R servo drive repair method.

1.Check the load First of all, check whether the load is too large, that is, check whether the connected communication device meets the specification requirements. If the load is too large, consideration should be given to replacing the appropriate communication device.

2.Check the power supply voltage overcurrent fault can also be caused by the unstable supply voltage. A multi-purpose digital meter can be used to check whether the supply voltage meets the rated value. If the supply voltage is unstable, you can try using a voltage regulator or changing the power supply.

3.Check that the motor overcurrent fault can also be caused by the motor fault. You can use a multimeter to check whether the insulation resistance of the motor is normal. If the insulation resistance of the motor is too low or there is a short circuit, the motor should be replaced in time.

4.Check that the wire connection is overcurrent, and the fault can also be caused by a poor wire connection. Check whether the connection between the driver and the motor is firm and whether the wire contact is good. If a problem is found, the conductor should be reconnected or replaced in a timely manner.