1. Preparations:
Before you start operating the ordinary dry powder machine, you need to make the following preparations:
1.Check the equipment: Make sure the dryer is in normal working order and there are no damaged or loose parts.
2.Preparation of powder materials: According to the process requirements, prepare the required powder materials and ensure that they meet the specified quality standards.
3.Safety measures: Wear appropriate personal protective equipment such as safety glasses, gloves and masks to ensure personal safety during operation.
2. Steps:
The following are the operation steps of the ordinary dry powder machine:
1.Start the device: Follow the machine's operating manual to start the dryer correctly and make sure all the control parameters are set properly.
2.Feeding: Add the prepared powder material to the silo of the dry powder machine, pay attention to observe the maximum load capacity of the equipment and avoid overload.
3.Adjustment parameters: According to the characteristics of powder materials and process requirements, appropriately adjust the operating parameters of the dry powder machine, such as vibration frequency, feeding speed, etc.
4.Run the dry powder machine: start the vibrating device of the dry powder machine, so that the powder material flows out of the silo at a uniform speed and passes through the screen for grading.
5.Powder collection: Through the collection device, the powder material passing through the screen is collected to ensure its integrity and purity.
6.Stop the device: After completing the operation, stop the dry powder machine correctly according to the operating manual of the device, and cut off the power supply.
3. Cleaning and Maintenance:
In order to ensure the normal operation of the ordinary dry powder machine and prolong its service life, regular cleaning and maintenance are required
1.Cleaning: At the end of each operation, remove dust and residue from inside and outside the unit, using appropriate cleaning tools and detergents.
2.Lubrication: Regularly inspect and lubricate critical components of the powder dryer, such as bearings and transmissions, to reduce wear and friction.
3.Repair: Repair or replace damaged or aging parts in a timely manner to maintain the stability and reliability of the equipment.
4.Regular inspections: Conduct regular comprehensive inspections of your equipment to identify potential problems and take appropriate action.