Haier front-loading washing machine is a powerful assistant in many families, and is loved by users for its efficient and convenient washing function. However, there are some problems that may be encountered during use, the most common of which is that the washing machine does not dehydrate. So, when Haier drum washing machines are not dehydrated, how should we deal with them?This article will give you a detailed introduction to how to solve this problem.
1. Check the dehydration procedure of the washing machine.
When the Haier drum washing machine is not dehydrated, the first thing to check is whether the dehydration program of the washing machine is normal. We can do it by following these steps:
Open the lid of the washing machine and remove the laundry to avoid damage to it in subsequent operations.
Close the lid of the washing machine, press the spin button, and observe if the washing machine reacts. If the washing machine starts to dehydrate, then the dehydration procedure is normal, and it may be that it is not dehydrated due to other reasons. This is where the rest of the washing machine needs to be further inspected.
If, after pressing the spin button, the washing machine still does not respond, then there may be a malfunction in the dehydration program. At this point, you can try restarting the washing machine to see if it can return to normal. If the problem persists after restarting, it is recommended to contact a professional maintenance personnel for maintenance.
2. Check the drainage pipes and solenoid valves.
Clogged drains are one of the common causes of washing machines not dehydrating. When inspecting the drain pipe, you can first disassemble the part of the pipe that connects to the washing machine to see if there is any foreign matter blockage. If a foreign object is found, it can be cleaned up with a tool. At the same time, care should be taken to avoid damaging the drainage pipes during the cleaning process.
A faulty solenoid valve can also cause the washing machine not to dehydrate. When inspecting, you can first disconnect the power supply of the washing machine, and then remove the adjustment rod nut of the solenoid valve to observe whether it is loose. If the nut is loose, you can tighten it and restart the washing machine for spinning operation. If the problem persists, you may need to replace it with a new solenoid valve.
3. Check the brake and drain valve coils.
The washing machine has a brake at the bottom of the barrel, which, if not released, can cause the motor to be too loaded to start the dehydration program. At this point, you can try adjusting the drain lever to let the brakes loosen. If you have difficulty adjusting by yourself, you can ask professional maintenance personnel to come to repair.
Burning out of the drain valve coil can also cause the washing machine not to dehydrate. When inspecting, you can remove the drain valve coil to view. If the coil is found to be burned out or badly damaged, a new drain valve coil needs to be replaced to restore the normal function of the washing machine.
4. Check the computer board and the safety switch.
The computer board is one of the core components of the washing machine, which is responsible for controlling the functions of the washing machine. When the computer board fails, it may cause the washing machine to fail to complete the spinning operation. At this time, you can try to overhaul the computer board or replace it with a new computer board to solve the problem. Since the maintenance of the computer board requires certain professional knowledge and skills, it is recommended to contact professional maintenance personnel for operation.
The safety switch is one of the important protective devices for washing machines. When the lid of the washing machine is not properly closed or the spinning process** is abnormal, the safety switch will automatically disconnect the power supply to protect the safety of the washing machine and the user. Therefore, when checking the safety switch, the first thing to do is to make sure that the lid of the washing machine is closed and that nothing unusual is happening. Then you can try adjusting the position of the kill switch or replacing it with a new one to fix the problem.
In short, when Haier drum washing machine does not dehydrate, we should check and eliminate the cause of the failure from many aspects. The key to ensuring the normal operation of the washing machine is to determine the cause of the failure and take corresponding measures to repair and maintain the dewatering program, drainage pipes, solenoid valves, brakes, drain valve coils, computer boards and safety switches and other components by checking the working status and connection of the dehydration program, drainage pipes, solenoid valves, brake devices, drain valve coils, computer boards and safety switches.