Doldr inlet oxygen pass-through filter
The imported oxygen filter is a special filter specially designed for the oxygen pipeline, the oxygen filter is composed of a diverter cone and a filter tube, and the thrust of the water flow mainly plays a role in gas diversion, so as to avoid the rupture of the filter screen caused by the frontThe oxygen filter is an indispensable device on the pipeline of the conveying medium, which is usually installed at the inlet end of the pressure reducing valve, pressure relief valve, water level valve or other equipment to eliminate impurities in the medium and protect the normal use of the valve and equipment. When the fluid enters the filter cartridge with a certain specification of filter screen, its impurities are blocked, and the clean filtrate is discharged by the oxygen filter outlet, when the oxygen filter needs to be cleaned, as long as the detachable filter cartridge is taken out, and it can be reloaded after treatment, so it is extremely convenient to use and maintain.
The doldr imported oxygen pass-through filter filter is composed of a diverter cone and a filter tube for the water flow thrust to avoid the rupture of the filter caused by the front, and is suitable for pipeline filtration of flammable, explosive and dusty gases When the gas containing solid impurities passes through the pipeline, it may cause severe friction and be ignited, and the consequences are unimaginable;Dusty gases often cause blockages in end-use gas equipment.
There are four points to the filter media:
1.Air filter: to make the polluted air clean to the state required for production and life, that is, to make the air reach a certain degree of cleanliness.
2.Liquid filter: make the contaminated liquid be cleaned to the state required for production and life, that is, to make the liquid reach a certain degree of cleanliness.
3.Web filter: Set up to block spam messages so that the information that appears on the computer screen is as good as possible. The principle of absorption separates different colors of light.
4.Light filter: Absorbs some unwanted light.
Main technical parameters of imported oxygen filter:
Caliber: DN25-400mm
Nominal pressure mpa5、 4.0
Hydraulic strength test pressure MPA75、 6.0
Barometric strength test pressure mpa4
Working pressure mpa0
Operating temperature: -20 150
Structural shape: straight-through, angular type.
Medium: oxygen, nitrogen, air, etc.
Body material: stainless steel.
Filter material: stainless steel;Mesh. Sinter.
Imported oxygen filter product use: Gas filter is widely used in gas filtration in industrial production departments, such as: air, oxygen and other gas filtration, to ensure the safe use of subsequent equipment. Structural characteristics: Doldr type oxygen filter is straight-through type, suitable for straight-through pipeline, YTG-A type is corner joint, especially suitable for pipeline bends, they all have the characteristics of large filtration area and small resistance.