HEIDENHAIN CNC system maintenance - x70 operation unresponsive troubleshooting and maintenance.
1. Circuit failure.
2. Incorrect data transmission of HEIDENHAIN CNC system: many problems such as abnormal power cord and poor plug connection may cause the CNC lathe to run normally.
3. Damage to the control card: the control card is subject to electromagnetic interference, high temperature, power supply voltage fluctuations and other factors, 4. The motor is damaged or the driver is bad, and the machine tool may not be able to be operated by the guide machine tool or the parameters need to be checked The machine tool cannot be operated normally, and the programming setting is required to check the soft barrier: the number control of the HEIDENHAIN CNC system is faulty or attacked by viruses, which may cause the machine tool to fail to work normally, and the software needs to be checked.
5. Sensor or switch failure: The sensor or switch of the machine tool of the HEIDENHAIN CNC system is damaged or fails, which may cause the machine tool to fail to operate normally and need to replace the damaged or failed parts.
HEIDENHAIN CNC does not respond to the repair method:
1. Switching power supply: check the power on, plug in the source power plug, whether the electrical connection is in place, etc., and keep the source up.
2. Check the data signal: check whether the signal line is transmitted, whether the plug connection is in place, etc., and the connection.
3.Inspection control card: The instrument detects whether the control card is damaged by factors such as excessive electromagnetic disturbance, and replaces or restores it according to the test results.
4. Check the servo drive and motor: check that the connection between the servo drive and the machine of the HEIDENHAIN CNC system is normal, and the instrument should be used to measure the servo drive and motor, and repair or restore it according to the inspection results.
5. Check the program programming or basic parameter settings: check whether the program or basic parameter settings of Heidenhain CNC system are correct, and try to reset or change the main parameters to ensure that the CNC machine tool can operate normally.
6. Check the software: use anti-virus software to check whether the HEIDENHAIN CNC system is attacked by viruses, and if there is a virus, remove and repair it.
7. Check the sensor or switch: check whether the sensor or switch of the machine tool of Heidenhain CNC system is damaged or invalid, use the instrument to detect the sensor or switch status, and replace or repair it according to the test results.