Putty powder is mainly used to fill and repair unevenness, cracking and other defects on the wall to achieve better results. However, during construction, because of the influence of the surrounding environment, or when mixing, there will be some bubbles, which will cause problems such as unevenness and holes in the finished product, which will affect the construction, so how to solve the foaming of putty powder?The application of putty powder solid defoamer can solve this problem!
Putty powder solid defoamer is made of organic silicon components adhered to and immobilized on the dispersion system of solid particles, which has good storage stability, convenient transportation and easy operation. By changing its carrier and additives, it can be applied to both water and oil systems, and has good media dispersion properties. Putty powder solid defoamer has a good application prospect in many industries. In addition, it also has excellent anti-foam and anti-foam properties.
Putty powder solid defoamer can not only be used in the production of various types of paper, but also can be used in fermentation, coatings, sewage treatment and other fields. These areas tend to consume a lot of energy and are expensive to produce. In addition, most of the chemicals used in these fields are pollution from the three wastes. In order to reduce the pollution of the three wastes and improve the efficiency of wastewater treatment, this kind of defoamer has a large market demand.
The application of putty powder solid defoamer in construction projects can effectively improve the construction efficiency of construction projects, reduce various quality problems in the project, and ensure the smooth implementation of construction projects. However, it should be pointed out that the technical specifications and instructions must be strictly followed during use to avoid excessive or improper use and other problems.
When using putty powder solid defoamer, a certain amount of defoamer should be added according to the specific situation, and it should be mixed evenly. Defoamer is added to the putty powder, and its dosage is usually 005%~0.3%。During construction, it can be stirred and adjusted in time as required.
The above content is provided by the "Defeng defoamer source manufacturer", if you need **, please indicate the source.