It is a very common problem that the backwater is dirty after flushing the toilet. There are many reasons for this problem, and here are some of the possible ones:
1.Jam. If there is a blockage in the toilet drain, such as paper, cotton balls, etc., the pores will be blocked, affecting the flow of water and causing the backwater pollution to be pushed back into the toilet.
2.Underground pipes are clogged. If the toilet is poorly connected to the sewer pipe or the pipe itself is blocked, the sewage will not be able to drain smoothly and will flow back into the toilet.
3.There are problems with underground concealment works. If the sewer is not properly laid and connected, there will be backflow problems when the underground sewage is discharged into the toilet.
4.There is a problem with the toilet itself. Sometimes this problem occurs due to a flaw in the structural design of the toilet bowl itself, such as the return pipe being too narrow to remove large pieces of dirt (the pores are extremely clogged with dirt).
5.The main pipe is blocked. Sometimes the backflow of sewage into the toilet bowl is caused by a blockage in the pipe drain at the gear.
Faced with this problem, we can do the following:
1.Clean the toilet. First of all, it is necessary to see if there is any dirt attached to the toilet inside, and if so, it should be cleaned with detergent or professional cleaning equipment in time.
2.Check the sewers. If there is a problem with the sewer, you can check the sewer first to see if there is a blockage inside. If a blockage is found, it can be unclogged with a professional tool.
3.Replace the toilet. If there is a structural problem with the toilet itself, the only way to solve the problem is to replace the toilet with a brand new one. The new toilet bowl should meet national standards and should choose a quality brand.
4.Find a pipe cleaning company. If you find that the problem is more complicated, you can seek help from a pipe cleaning company. Pipe cleaning companies have specialized equipment and technology to quickly detect and repair pipeline problems.
In general, a dirty toilet backwater is a relatively common problem, and most of the solutions are to clean or inspect the drain. If you are unable to solve the problem on your own, it is recommended to contact a professional to deal with it.