Foreword:
Now the mainstream DIY market in the high-end host configuration, 7K-1W yuan or so budget is the most common budget collocation of the high-end host, for the pursuit of high special effects, high fluency of the gamer, such a positioning budget of the host in the high-end direction is also very popular. For the average worker, after all, the budget is limited, so they can only take advantage of the period of double eleven and double twelve discounts to divide into two time periods to "purchase", and toss out this set of high-end configurations, practicality and appearance of the 9000 yuan budget of the seaview house host sharing.
Host Showcase:
Because the original installation concept also uses the mainstream sea view room chassis, and the cabinet is an all-black cabinet, the classic black and orange color matching is also used in the color matching of the host to match this sea view room host.
Hardware configuration:
The configuration is also the use of the current mainstream mid-to-high-end host collocation, Double 11 starts with the main accessories such as CPU motherboard, graphics card, memory, and Double 12 is electromechanical dispersion.
Processor: Intel i5 13600kf
Board: ASUS TUF Gaming B760M-Plus WiFi Heavy Gunner.
Graphics: ASUS Tuf GeForce RTX 4070 O12G Gaming
Memory: Bodesmann Cerberus & ASUS TUF co-branded DDR5 6800 16*2 32G
Solid state: Critical P5Plus 1TB SSD.
Chassis: Overclocked Samsung World C3 T500BK
Dissipation: Overclocked triple DE360 black all-in-one liquid cooler.
Power supply: ASUS TUF 750W Gold fully modular ATX30 power.
CPU selection, although now the 14th generation Core has been launched, but there is not much improvement in performance, in contrast, the 13th generation Core has a better cost performance, take the installed i5 13600KF as an example, the boxed within 1800 yuan**Compared with the 14600KF of about 2000 yuan, it is basically the same in terms of performance,**It is also a few hundred cheaper。 It's more appropriate to add these few hundred budgets to other hardware.
The selection of other installed accessories also revolves around the matching of the whole machine, such as the motherboard, graphics card, and memory are all in the same series of models or co-branded models, so that the coordination of the match is more unified, and there is no need to worry about the so-called color incongruity.
The motherboard is the TUF B760M-Plus WiFi Heavy Gunner D5 motherboard from the ASUS Gaming series. The exterior inherits the black and orange tones that Tuf has always been the main one, and has made minor adjustments to the vest design, and the standard M-ATX plate shape. The power supply part adopts 12+1 power supply module, dr.MOS 60A, Digi+VRM digital power control, 8+4 pin ProCool high-intensity power connector. The motherboard offers four high-strength DDR5 memory slots with the new SafeDimm, and a dual-slot XMP that supports up to 7200MHz of D5 memory.
In terms of memory, it is also centered on matching motherboards, and the Bodesmann Cerberus TUF co-branded DDR5 6800 32G (16*2) memory. The single-sided Hynix A-Die is designed with a Richtek-type overclocking PMIC that does not shift due to voltage when setting the memory voltage, and supports Intel XMP 30 and AMD ExPro technology, memory frequency up to 6800MHz (official super), the default timing is CL 34-45-45-108.
In order to meet the gaming performance needs of 2K monitors and unify and coordinate the appearance, this is used in the graphics card collocation - ASUS TUFF RTX 4070T O12G, which retains the appearance design style of TUFF military specifications, the heat dissipation vest is made of all-metal material, matte black color matching, matte texture, and the surface is embellished with the English name of Tuf Gaming and the coordinates of ASUS headquarters. The overall length of the graphics card is 305mm, and the front of the graphics card is equipped with three axial-tech axial fans, which support full-height barrier rings to greatly increase the static pressure, and the middle fan and both fans are designed to rotate forward and reverse, which can reduce air turbulence and improve the utilization rate of heat dissipation airflow, and support low-load stall technology, so that the fan can enter a more efficient noise-reducing operation under low load.
The metal back panel on the back is also made of the same matte black color + matte texture paint as the front, the TUFF elements and related graphic text on the covered vapor panel are decorated, the tail is hollowed out in a large area, and the opening style echoes the surface pattern to form a TUFF graphic logo, and the opening can effectively improve the heat dissipation efficiency on the back. The graphics card adopts a large-area exposed fins cooling design on the top and bottom, and still uses the traditional two-stage heat dissipation module layout. The thickness of the side vest is about 64mm, and it adopts 25 slot design. It can also be used to meet the needs of 2K high brushes or entry-level 4K high brushes, if you want a better 4K gaming experience, then you can only add money to 4070ti 4080 4090 These high-performance graphics cards.
The chassis uses a very decent mainstream sea view room design cabinet - overclocking Samsung C3 T500BK. The interior design of the box is still a structure with left and right compartments, and the front and front are glass. However, compared with the same type of Bauhaus mini or mini air, the height is reduced, but the length and width are increased a little, so that the size of the whole cabinet reaches: 415 (L) x 295 (W) x 368 (H) mm. This is also a volume difference, in fact, whether the former or the latter are not much different in volume, the same is a compact ATX case, the volume of the M-ATX case can be compatible with ATX motherboards to compare more appropriately. However, this chassis is maintained in the range of 300 yuan, so as to increase the cost-effective competitiveness of the product. **There are advantages, in terms of architecture compatibility, it can also adapt to mainstream hardware, and the appearance of the sea-view room design can meet the aesthetics of the mainstream box.
The decoration of the front panel is also a relatively simple design, and the three new logo "CPS" and the new triangle logo elements on the right side are particularly prominent, which is indeed much simplified compared to the old logo.
Overclocking Samsung C3 T500 main installation compartment, using a large area of multiple openings to support the installation of the back plug motherboard, the back cabin part also adopts a lot of avoidance design to meet the installation of back plug hardware, of course, it is also compatible with the installation of ordinary motherboards. The CPU air-cooled radiator supports up to 175mm, the graphics card can support up to 400mm, the middle trunking position is 90° folded angle design, and the right radiator position is sunk, which can support the installation of 240 water cooling. The cabinet also adopts the A-pillar design without triangular support, which is now very popular, to add to the aesthetics of the entire cabinet.
In order to make the load-bearing of the whole box more uniform, the Astral C3 T500 adopts a U-shaped foot brace, which is visually more harmonious than the ordinary independent foot brace for this wider volume, and of course, the large volume of the foot brace is also better in stability. The IO panel part of the case is placed on the top of the case, or it will be suitable for the design of placing the host on the ground for daily life, but it is a bit less user-friendly if it is placed on the desktop.
Due to the limited volume of the cabinet, this case is not designed with a 3*360 heat dissipation installation architecture, but the installation layout of the upper and lower dual 360s is also enough to meet daily use. 120mm and 140mm fans are reserved for the bottom and top to facilitate air intake at the bottom, and there is also a magnetic dust filter.
The power supply used is also matched according to the hardware, although the power consumption of the i5 13600KF and RTX4070 host at full load will not exceed about 400W, and it is enough to match the 650W power supply. But in order to have more room for upgrades, reserve an extra 100W -- TUF loader 750W ATX3There is no big problem with the 0 brand fully modular power supply, which comes with the native ATX3The 0 (12+4p) interface also makes sense. Therefore, it is also suitable for the power supply needs of some RTX4070 and even RTX4070Ti graphics cards with 12+4 16P power supply.
The power supply adopts the mainstream architecture of LC+DC to DC of Qiaowei, with a +12V single output of 744W, and a dual main capacitor design, using the main capacitor as a low ESR Japanese capacitor. The fan adopts a 135mm axial fan with double ball bearings, which has good heat dissipation and quiet performance, and it is also worth mentioning that the inner PCB is designed with a protective coating, which is better moisture resistance, which is very suitable for humid days in the south.
As for the heat sink, because the i5 13600kf processor with high power consumption is used, the heat sink is selected with better efficiency - overclocking three DE360 AIO liquid cooling solution to solve the pressure temperature. This water cooler is available in two of the most common shades, black and white. In terms of packaging appearance, the new design ID is continued, with a white theme with orange accents, and the front is the main image and model logo of the product, which has a high degree of recognition. The icon in the lower left corner indicates that the DE360 adopts a dual water pump cooling solution, CNC aluminum cold head, ARGB god light synchronization, and supports Intel and AMD platforms.
Overclocking triple DE360 integrated liquid cooling monolithic black and gray coating, square on all sides, radiator size is the mainstream 397 x 120 x 27 mm specification, cold liquid tube length is 430 mm, the length is longer than the conventional 380mm-400mm, with better compatibility performance. The water-cooled tube has a soft texture. The exterior is wrapped in nylon braided material, and the connection between the water pipe and the radiator is reinforced by metal parts, with a red and blue ring logo indicating the circulation of hot and cold water.
With the use of double water pump design, it stands to reason that the size of 70*70*55mm will be larger than the traditional single water pump cold head, but from a practical point of view, the overall vision is not very prominent after arc treatment, and it is similar to the conventional cold head. The cold head is equipped with a nine-slot, ten-stage three-phase low-noise motor, and a ceramic shaft with excellent self-lubricating properties to improve the service life and noise reduction effect.
Coupled with the radiator neat and tight heat dissipation fins, the radiator provides 12 waterways, the new Z-shaped arrangement of the radiator, the fin opening, the thermal contact area is wider, and the 27mm thickened design further increases the water coolant capacity, reduces water resistance, so as to achieve better heat dissipation effect, with its own three P120Pro high-performance booster fans with excellent performance and silence, using FDB fluid dynamic hydraulic bearings, 9 blades with high wind pressure orientation, pure copper shaft sleeve design, The red dispensing at the pivot indicates that the fan has been corrected for a second time.
The fan comes with **, which is connected in series through a three-point bus, which makes the overall cable more concise. The back of the fan is designed with a pressurized frame to make the flow channel more dense, with a speed of 600-1850 10% rpm and a maximum airflow of 7186 cfm with a maximum wind pressure of 246 mmh2o。
Installation Details:
During installation, the removal of the front glass panel is not too complicated in the installation of the removal panel because of the use of the elastic buckle design, but the front glass panel is fixed with the inner screws, so the problem comes, whether it is to remove the glass panel for hardware installation, or how to re-fix the panel when the hardware is installed, similar to the figure below to install all the heat dissipation hardware, which will lead to no space for screwing. If you really need to remove the glass panel for installation, then you must first screw the glass panel and then continue to lock the screws of the fan and radiator.
The side cooling air duct inside the cabinet can be used as an inlet or outlet air to switch the installation. A 360-gauge radiator or fan can be installed at the top and bottom at the same time for heat dissipation and convection, plus the rear air inlet, this case can be installed with a total of 9 sets of 12cm cooling fans, and two sets of 360 radiators can be installed on the top and bottom. From the perspective of installation specifications, the width of the entire chassis reaches 295mm, and the maximum height of the heat dissipation limit supports the installation of a heatsink with a height of 175mm.
From the perspective of the overall hardware installation effect, this case is very compact in terms of volume, although the motherboard specifications that can be supported include ATX M-ATX ITX, but installing ITX motherboard will make the inside of the case look very empty, only suitable for installing ATX or M-ATX two board types. The maximum specification of 400mm in terms of graphics card compatibility provides 6 PCI slots, so 25 slots: 3 slots thick graphics card can basically cover the exposed part of the lower half when installed.
Finally, let's take a look at the back line part, the back line part is actually arranged according to the conventional installation, and the effect is actually still OK, because the anchor point of the binding wire is sufficient, but I personally feel that the back line design of this chassis is basically more biased towards the back plug scheme, and you can see that the opening of the hardware is basically reserved for the back plug wire and the anchor point of the binding wire, corresponding to different board types are targeted to avoid the opening correspondence. There is no need to introduce the front and rear compartments, the heat dissipation area on the left, the hard disk and power installation area on the right are very clear.
Performance Testing:
In the performance test part, let's first take a look at the temperature performance of the CPU and graphics card in the chassis of this sea view room. The silent frequency power consumption of the CPU: 170W, the overclocked DE 360 water cooling controls the CPU temperature at 67 (fully loaded oven), and the core temperature is controlled at 78. The large core is all controlled within 78, and the small core is basically controlled within 68. Because the voltage given by the B760 is generally higher than that of the Z790 motherboard, the temperature will also increase. It is very good that the temperature at full load can be controlled at this temperature.
In fact, as a daily game console, the CPU temperature is basically not fully loaded, and the full load is the GPU core, so we should pay more attention to the temperature change of the graphics card. The temperature performance of the TUFF RTX4070 012G used this time is also good, of course, the air intake heat dissipation level under the sea view room also plays a non-negligible role, GPU core temperature 62, hot spot temperature 74, video memory temperature 62.
3D Mark's ray tracing, DX12 4K and 2K benchmark scores, and DX122K's stress test scores are as follows:
In terms of game measurement, because of the space, we can only compare the frame rate of several mainstream FPS games and stand-alone games that we often play every day**. The monitor uses a 2K 170 refresh monitor, and the game includes (Valorant, Apex, CS GOII, Naraka: Infinite, 2077, Resident Evil 4 Remastered, a total of 6 games) handed over a very good performance under the use of a 2K monitor, please refer to the specific frame rate below**.
Summary:
For this installation,In fact, it is also a toss to add a leisure time to your dull work life,The first is that the appearance of the host also meets the aesthetics of the current mainstream for the sea view room chassis。 The second is to toss this practical host on your own limited budget. All in all, it is the most suitable for your daily use.,Okay, this installation sharing ends here.,If you like it, you can collect it for reference.,The full text is over.。