Strong transmembrane reactive bond waterproofing membrane is made of special high-density polyethylene cross-linked laminated (HDPE) high-performance film and high-quality polymer self-adhesive rubber asphalt processed by special technology. It is a self-adhesive waterproof material for cold construction. volume material. So how is it constructed.
The reaction bonding waterproofing membrane is first laid at the laying position of the polymer waterproofing membrane 3-12 meters (2-3 meters can be pre-laid for underground engineering), and then fixed in the middle. Roll one end of the roll into a fixed position and stick this end. Finally, roll the other end of the pre-laid membrane back into the pasting position and continue paving until the road surface is completely wide.
Construction method: While brushing the base layer (screed) with a brush, drain the upper surface of the roller with a scraper to make the bonding surface dense and drain the excess adhesive. Strong transmembrane reaction bonding self-adhesive waterproofing membrane waterproofing membrane waterproofing membrane not only has wind resistance and waterproof performance, but also has an ideal sound insulation effect, which can absorb and reduce the impact of rainwater on roof noise and ensure quiet living conditions.
The application of waterproofing coatings has a lot to do with the conditions of the foundation. Prepare the substrate before painting. The more uneven the base layer, the more paint will be used. Therefore, before applying waterproof coatings, it is advisable to make the base layer as smooth as possible.
Easy to repair: Because the cement slurry is completely cured, defects such as shelling and hollowing are effectively avoided. At the same time, the surface layer of the membrane is firmly bonded with the cement slurry, which effectively prevents water channeling. Even if the membrane is partially damaged, the water is confined to a small area, which increases the reliability of the waterproofing layer, since the point of damage and the possible point of leakage are in the same location.
Scope of application. 1) Waterproofing and seepage prevention of various underground projects, such as basements, civil air defense projects, subway and other waterproof projects.
2) Waterproofing of roofs and exterior walls of industrial and civil buildings.
3) Moisture-proof and waterproof works for grain depots and electronics factories that are sensitive to moisture. 4) There are seawater corrosion, waterproofing and anti-corrosion projects in coastal areas.