A large hole in the toilet is a crack or damage in the sewer, which can cause the toilet to leak and in severe cases, affect the use of the entire bathroom. Therefore, when you find that there is a big hole in the toilet, you need to deal with it in time, and here are some ways to deal with it.
1.Repair with cement mortar.
You can buy some cement mortar suitable for use in the water, and then apply some mortar on top of the hole to plug the hole and make it smoother, but you need to make sure that the material is fully hardened when you use it, otherwise more leaks will form.
2.Use water hose glue to fill the hole.
Hose glue can be purchased at appliance stores and has a sticky composition that holds it to the drain and fills the void inside. When using, wipe off the running water and apply a layer of glue to allow it to harden naturally.
3.Replace the sewer with a new one.
If the hole is too large, DIY is not recommended, and the sewer pipe may need to be replaced. Consult a professional or find a local repairer to help with the replacement. In addition, if the sewer pipe is aged and worn out too much, it is also necessary to pay attention to timely replacement so as not to affect life.
No matter how you dispose of it, don't pile too much waste and paper when using the toilet, and don't dump chemicals and other dangerous goods to avoid damage to the sewer pipes. At the same time, it is also very important to maintain good usage and maintenance habits, clean and flush frequently, and avoid using sharp and hard objects to hit the bottom of the toilet, which can make the toilet last longer.