If the lighter gets into the water and can't be hit, the following measures can be taken:
Dry: Place the lighter in a ventilated place to dry to remove moisture from it. Drying time varies depending on the material of the lighter and the amount of water ingress and can take several hours or more.
Drying: Use a hair dryer or place it in a warm, dry place, such as next to a stove, to speed up water evaporation. Be aware, however, that excessive heating may cause damage to the plastic or metal parts of the lighter.
Tap: If there is a lot of moisture inside the lighter, you can tap the lighter gently to help the moisture flow out. But avoid using too much force to avoid damaging the lighter.
Replace the wick: If none of the above measures resolve the issue, you may need to replace the wick of your lighter. The cotton wick is the absorbent material inside the lighter, and if it absorbs too much water, it will affect the ignition effect. Before replacing the cotton core, make sure that the lighter is completely dry.
Precautions: When dealing with the problem of water ingress into the lighter, it is important to pay attention to safety. Do not attempt to place the lighter near a fire source to prevent ** or burns. At the same time, if the lighter is damaged or does not work properly, it is best to discard it and buy a new one.
In conclusion, dealing with the problem of lighter water ingress requires patience and care. Before taking action, it is best to place it in a safe place and make sure that the moisture has been completely removed. If the problem cannot be solved, it is advisable to consult a professional or seek other help.
Autumn and Winter Check-in Challenge