From self-taught fabric handicraft, to now being able to look at pictures and make bags, the biggest benefit I get is to see the style I like, make one immediately when I get home, and I can use it the next day.
This is the third phone bag I have made this year, and as the saying is popular now, I am a phone bag free!
Now I will share with you the process of making it step by step.
Prepare a piece of 180 grams of cotton (45 cm to 15 cm) and cut two rectangles (5 cm 2.) at the center line5 cm), then round the four corners with a diameter of 8 cm.
Next, divide the auxiliary cotton into two parts, and the width of the small one is 7 centimeters.
Then burn it on the face, you need to put a sewing portion, put 2 cm sewing in the place just cut, and put 1 cm on the other.
Prepare a 13 cm long zipper, use a nylon zipper, and flush down the front of the zipper and rest it on your face.
Then prepare a pocket cloth (30 cm to 13 cm), cover it with a zipper, align the center points of these three materials, and turn them together.
The other end of the pocket cloth is attached to the other side of the zipper, and the side of the pocket is also attached to the car.
Don't forget that there is another small piece of face material, which we face to front and give to the car. The current state is that the pocket material is at the bottom layer, then the zipper layer, and the top is the small piece of face material.
Next, fold the seams on both sides of the zipper, cover the zipper, and then sew the two ends of the zipper to fix it (a few more stitches).
Then fold the face in half, along the side and bottom corners of the auxiliary cotton car, and the side sides are from both ends of the arc.
Now you can prepare the lining, the size of the lining is 47 cm 17 cm, and the four corners are also rounded with a diameter of 8 cm.
We can make a sandwich on the inside according to the size of our phone. It is also possible to make a zipper pocket on the lining.
The next thing is to do the same thing as the face, fold the lining in half, the side and bottom corners of the car. Then stuff the lining into the face, align the side seams, and make a circle around the mouth of the bag, and wrap the raw edge with an edging belt.
Finally, there are 2 D-shaped buckles on both sides of the bag, which are 15mm specifications. Nail a snap button in the middle of the bag.
The finished package has a height of 25 cm, a width of 10 cm and a thickness of 5 cm.
Thank you for taking the time to pay attention to my handiwork, remember to help like it, thank you!