Automatic transmission vehicle start and stop the correct steps:
With the advancement of technology, automatic transmission vehicles have become the mainstream in the market. However, many people still have some misconceptions when starting and turning off an automatic transmission vehicle. This article will detail the correct steps to start and stop an automatic transmission vehicle to help you better drive an automatic transmission vehicle.
1. Fasten your seatbelt before getting into the car.
Whether it's a manual or automatic vehicle, the first thing to do when you get into the car is to fasten your seatbelt. Seat belts are an important piece of equipment to ensure the safety of drivers and passengers, and can reduce the impact of collisions in the event of an accident.
2. Start the automatic transmission vehicle.
1.Press the brakes: Before starting an automatic transmission vehicle, the brake pedal must be pressed. This is to ensure that the vehicle does not move during the start-up process and to ensure the safety of the driver.
2.Press the push-start button: Modern automatic transmission vehicles are usually equipped with a push-start function. Simply press the start button lightly and the vehicle will start. Make sure you have pressed the brake pedal before pressing the button.
3.Engage D: Move the gear lever from P (Stop) to D (Forward). In this process, it is necessary to ensure that the gear lever has fully entered the D gear position to avoid misoperation during driving.
4.Press the electronic parking brake: After engaging the D gear, press the electronic parking brake button. This will keep the vehicle's braking system in working order, ensuring that the vehicle can stop at any time while driving.
5.Release the foot brake and press the accelerator pedal: When the electronic parking brake has been pressed and the gear lever is in D gear, the brake pedal can be released and the accelerator pedal can be lightly pressed. The vehicle will start moving forward, adjusting its speed according to the force of the accelerator pedal.
3. Flame-off automatic transmission vehicles.
1.Engage in nth gear after stopping: Allow the vehicle to come to a stable stop in a stable place before preparing to turn off the engine. Then, move the gear lever from D to N (neutral). This is to ensure that the vehicle's drivetrain is not damaged during the stalling process.
2.Pull the electronic parking brake: After engaging the N gear, pull up the electronic parking brake. This will keep the vehicle's braking system in working condition, preventing the vehicle from moving after the ignition is turned off.
3.Re-engage in P gear: When the electronic parking brake is already pulled, move the gear lever from N to P (Parking gear). This is to ensure that the vehicle can be safely parked in place after the ignition is turned off.
4.Release the brakes: When the gear lever is in P gear, the brake pedal can be released. At this point, the vehicle is fully parked and in a safe state.
5.Press the one-button start button to turn off: Finally, simply press the one-button start button lightly and the vehicle will stall. Make sure you have completed all of the above steps before pressing the button.
Summary: From the above introduction, we can see that the starting and stopping process of automatic transmission vehicles is actually not complicated. Just follow the right steps and you can easily drive an automatic transmission vehicle. At the same time, in order to ensure safety, drivers should fasten their seatbelts first after getting into the car and pay attention to the surrounding road conditions and traffic conditions at all times while driving. When parking, you should also choose a stable place to park your vehicle and pull up the electronic parking brake to prevent the vehicle from moving.