Features. Digital inputs with up to 16 audio channels.
Network audio via cobranet
Network control and monitoring via SNMP.
It is controlled by RS-232 serial port.
Analog inputs, asynchronous and microphone lines for the cinema processor.
The master volume and 1 3 octave diagram illustrate all channels of the equalizer.
Booth monitoring, touch screen control, easy to operate.
Digital speaker crossovers.
Three- or five-screen channels are passive and 2-, 3-, or 4-way crossing.
Compatible with all existing DCA amplifiers DCA equipped with thousands of screens ready for network-wide monitoring.
Dual-power supply that works seamlessly in the event of a failure.
SD card memory card for fast unit swap to restore all settings.
Multi-bypass mode routes the faulty components of the audio to ensure that the program will continue.
Computer-based software setup, control, and monitoring.
DSP preset DCS loudspeakers provide outstanding "out-of-the-box" performance and reduced set-up time.
Cross-support for active 2, 3, and 4-way systems as well as passive systems.
QSonitch and QScreator allow authoring of custom control screens and remote access for fault reporting and troubleshooting.
Cinema processors that are easy to integrate with existing dual-film digital projection systems.
Cobranet provides digital asynchronous routing and future scalability.
The continuous development of software and firmware will add new features and make it easy to update existing hardware firmware.
The DCP 300 is a requirement for sound systems designed for use in digital cinema.
Power switch, rocker switch.
Mute control button.
Auditorium pushrod rotary encoder.
Monitor the amount of parameter adjustment of the rotary encoder.
Menu drive LCD touch control LCD screen.
Rear panel connectors.
Digital cinema input 1 set DB-25: AES3 EBU channels 1-8
Digital Cinema Input 2 sets DB-25: AES3 EBU channels 9-16
Main analog input pins: analog audio channels 1-8
Extended Surround Input Pin: Surround Harmony channel.
Universal Microphone Line-in interface: MIC (+ Phantom PWR) or Line Level.
S PDIF RCA input: stereo digital audio interface and LT RT matrix.
RCA(L R) input RCA(2): Stereo left, right, and LT RT matrix.
Data port output HD-15(14): QSC power amplifier interface.
Automatic input 6 euro style (2) TTL compatible dry contact closure.
Serial control DB-9 RS-232 serial interface.
Logic output 4 euro type (2) exit control.
Relay output 6 euro style (2) outbound control.
Configuration and management interface for USB ports.
QScontrol RJ45 10 100 Mbps and SNMP network management.
Cobranet RJ45S 100 Mbps primary backup network audio.
SD card socket configuration memory card (1 national standard).
Hi and sixth impairment output.
The output stage is single-ended (balanced).
Output impedance 50 ohms.
Nominal output level 118 logistics (200 sq.m.).
Loading requires rmin = 2 K and cmax of 4 N
Audio networking. Protocol: Cobranet Protocol Version 2.
Data rate 100 Mbps (Fast Ethernet).
1 major port, 1 backup (automatic failover).
Connectivity requires a CAT-5 UTP cable or better (up to 100 meters in length), directly connected to the switch port of the wired network, private LAN or VLAN
qscontrol network.
The standard TCP IP protocol implements Ethernet or Fast Ethernet.
10 100 Mbps data rate.
Connectivity requires a CAT-5 UTP cable or better (up to 100 meters in length), directly connected to the switch port of the wired network, private LAN or VLAN
Line voltage requirements 100 240 VAC, 50 60 Hz.
Dimensions (hours, weight, dimensions) 525" 19" (133 mm, 483 mm, 386 mm).
Weight 166 lbs (7.)5 kg).