10 tons of biomass gas boiler SCR denitrification equipment manufacturers.
After the introduction of many previous articles, many customers must have a certain understanding of the denitrification process, if you also want to contact the denitrification equipment, let us come up with a plan, please first understand the boiler parameters, for example, the tonnage of the boiler, what fuel is burned, the furnace type of the boiler, the initial concentration of nitrogen oxides, and.
There is a standard that is required to be lowered, and then there is the oxygen content, because the amount of oxygen content is also more critical, if the oxygen content is high, the customer can find a way to control the oxygen content, so that the nitrogen oxides will also be reduced somewhat.
The polymer denitrification process is mature and reliable, with low investment cost, low operating cost, good denitrification effect, no ammonia escape, no secondary pollution It has been successfully operated in the denitrification of coal-fired, gas-fired and biomass boilers such as steel mills, chemical plants and lime kilns. Changqian environmental protection polymer denitrification technology is widely used in circulating fluidized bed boilers, and there are many engineering cases.
Many, among them, large, medium and small fluidized bed boilers are available.
According to the parameters, we can determine the denitrification process for you, because the gap between the denitrification process is also relatively large, so the more accurate the parameters, the more accurate it is. What is the matter with polymer denitrification, I will briefly tell you that it is a kind of furnace denitrification process, which adopts the powder gas phase automatic conveying system in the furnace flue gas.
At the outlet and in the high temperature area of the furnace, several suitable positions are selected to punch holes to spray the polymer denitrifier, and reduce NOx to N2 and H2O in the appropriate reaction temperature area. This denitrification agent is available on the market, probably more than 3,000 tons. 10 tons of biomass gas boiler SCR denitrification equipment manufacturers.