Hankou PVC board sanitary partition installation steps.
Hankou PVC board sanitary partition is a commonly used partition material, which has the advantages of waterproof, wear-resistant, and easy to clean. The following will introduce the installation steps of Hankou PVC board sanitary partition.
1.Preparation: First of all, you need to prepare the tools and materials required for installation, such as electric drills, rulers, screwdrivers, screws, partition plates, etc.
2.Measure the size: Use a ruler to measure the size of the bathroom according to the actual needs. Based on the measurement results, determine the size and number of partition panels.
3.Install the rails: Use an electric drill and screws to secure the rails to the ground and ceiling. Make sure the rails are securely installed to support the securing of the partition plate.
4.Install the fixing bracket: Install the fixing bracket on the wall as needed. Use an electric drill and screws to secure the bracket in place.
5.Install the partition plate: Insert the partition plate into the guide rail and the fixing bracket in sequence. Make sure the partition plate fits snugly with the rails and bracket and is not loose.
6.Adjust the position: Adjust the position and height of the partition plate as needed. Make sure the partition board is installed in the right place to meet the actual needs of the restroom.
7.Secure the partition plate: Use a screwdriver to secure the partition plate to the rails and brackets. Make sure the partition plate is securely fastened and will not wobble or loosen.
8.Clean the bathroom: After completing the installation of the partition board, clean the toilet in time to ensure that the toilet is clean and hygienic.
The above is the installation steps of Hankou PVC board sanitary partition. During the installation process, it is necessary to pay attention to safety and follow the relevant operating specifications to ensure the quality and effect of the installation. I hope you find the above helpful.