PVC soft biogas digester is a new type of biogas equipment, which has the characteristics of easy installation, safe use and environmental protection. Here are the installation steps for the PVC soft biogas digester:
Preparation: Before installation, you need to make adequate preparations. First, choose a flat, solid ground to ensure that the digester does not collapse, for example. Clean up the surroundings to avoid debris affecting the installation. Prepare the tools and materials needed for installation, such as PVC materials, glue, scissors, tape measures, etc.
Measurement size: According to the design drawings or the parameters provided by the manufacturer, measure the size of the biogas digester. Draw a corresponding range at the installation site to ensure that the biogas digester is placed in the right place.
Flattening the PVC material: Lay the PVC material in a delineated area, making sure that the material is not twisted or wrinkled. Use a tape measure to measure the size and make sure the material is the right size.
Apply glue: Apply an appropriate amount of glue to the joints of the PVC material to ensure that the glue is evenly applied and free of bubbles. The glue should be selected from the best brand to ensure the paste effect and durability.
Splicing PVC material: Splice the PVC material coated with glue to form a complete biogas digester shape. Note that the seams should be flat and firm to avoid warping or loosening.
Installation of pipes and valves: According to the design drawings or the instructions provided by the manufacturer, install the pipes and valves such as the inlet, outlet, and exhaust port in the corresponding positions. Make sure the installation is secure and there are no leaks or blockages.
Sealing: After installation, all seams and valves are sealed. Use an appropriate amount of sealant or waterproof tape to seal it to ensure that there is no air or water leakage.
Test acceptance: After the sealing treatment is completed, the test acceptance is carried out. Add an appropriate amount of water to the digester, close all valves, and perform a seal test. Observe for leaks or abnormalities, and deal with them in a timely manner if necessary. After passing the test and acceptance, it can be put into use.
It is important to note that it should be kept clean and safe during installation. Avoid contamination of the installed digester by debris or dust. At the same time, care should be taken when operating to avoid scratches or damage to PVC materials caused by sharp tools. If you encounter a problem, you should deal with it in time, and if you can't solve it by yourself, you should contact professional and technical personnel for repair or replacement parts.
In addition, it is also necessary to pay attention to safety precautions during use. For example, regularly inspect the digester and its pipes for damage or leakage;In the process of use, it should be carried out in strict accordance with the operating procedures to avoid potential safety hazardsAt the same time, the internal and surrounding environment of the biogas digester should be cleaned and maintained regularly. Only through the correct installation and use operation can the normal operation and service life of the PVC soft biogas digester be guaranteed.