1. Overview
Quarry 400 bags bag dust collector is a kind of equipment widely used in the field of dust control, it has the characteristics of high efficiency, reliability and environmental protection. This article will introduce in detail the principle, structure, characteristics and precautions for use of the quarry 400 bag bag dust collector to help you better understand the performance and scope of application of the equipment.
Second, the principle introduction
The quarry 400-bag bag dust collector adopts the principle of bag filtration, which filters the dust-containing gas through the bag, and the dust is intercepted on the surface of the bag, and the clean gas is discharged through the bag into the exhaust pipe. The equipment mainly relies on the following principles to achieve dust control:
Inertial collisions:When the dusty gas passes through the bag, the dust collides with the bag by inertia under the drive of high-speed airflow, and is intercepted on the surface of the bag.
Sieving effect:The surface of the bag filter has a mesh structure, which can screen the large particles of dust and leave it on the surface of the bag.
Electrostatic action:Some fabrics are electrostatic, allowing them to absorb charged dust particles and leave them on the surface of the bag.
Interception effect:The bag mouth of the bag filter is equipped with a special sealing device, which can effectively intercept the dust on the surface of the bag and avoid dust leakage.
3. Structure introduction
The quarry 400 bag bag dust collector is mainly composed of the following parts:
Housing:The main part of the equipment is equipped with parts such as a filter chamber and a fan.
Cloth bag:It is made of high-quality filter material, which has good air permeability and durability. Each bag is equipped with a special bracket and hanging device.
Injection device:Compressed air is sprayed inside the bag to vibrate and shake to remove dust from the surface of the bag.
Control system:Including PLC, sensors, operation interface and other components, it can realize automatic control and remote monitoring.
Exhaust pipes and fans:Exhaust the filtered gas outside while providing the power needed to run the equipment.
Fourth, the characteristics of the introduction
Quarry 400 bags bag dust collector has the following characteristics:
High dust removal efficiency:The use of 400 filter bags for filtration enables efficient dust removal and meets stringent emission requirements.
Large filtration area:The filtration area can reach thousands of square meters, which is suitable for large-scale quarry dust control.
Adaptable:It is suitable for various types of dust control, such as crushing, screening, conveying and other links.
Low energy consumption:The energy consumption of the equipment is low, which meets the requirements of energy conservation and environmental protection.
Eco-friendly:The filtration method without secondary pollution is adopted, which meets the national environmental protection requirements.
Easy maintenance:The structure is simple and reliable, and the daily maintenance is small. At the same time, it is equipped with an automatic control system, which can realize automatic control and remote monitoring.
Long service life:The use of high-quality filter materials and structure, long service life, high economic benefits.
5. Precautions for use
When using the quarry 400 bag bag filter, you need to pay attention to the following:
Operators need to be professionally trained and familiar with the operation and maintenance methods of the equipment.
During the operation of the equipment, it is necessary to regularly check the filtration effect and use of the cloth bag, and replace or repair it in time if any abnormalities are found.
The equipment should be installed in a ventilated and dry place to avoid the effects of direct sunlight and humid environments. At the same time, it is necessary to ensure that the installation foundation of the equipment is stable and firm.