Heidenhain CNC system repairHEIDENHAIN CNC systems can be used in body building, the aerospace industry and measurement control. In the aerospace industry, HEIDENHAIN CNC systems can be used to quickly and efficiently reduce the cost of reducer and engine components, and to improve the quality and output of components.
Heidenhain CNC system repair case sharing:
41：error message%.Static monitoring error in 2s.
cause of error
The static error is greater than the machine parameter MP1110x.
Analog axis: Drift is too large.
Vertical shafts: Poor braking performance or weight balance failure.
Clamping shaft: high mechanical force during machining
error correction
Simulate Axis: Adjust the drift.
Vertical axis: Check the brakes or weight balance.
Clamping shaft: excludes any mechanical forces during machining.
Contact Shanghai Yangon Electronics Customer Service.
HEIDENHAIN CNC system maintenance includes: X70 system maintenance, LE426M system maintenance, ITNC530 system maintenance, TNC620 system maintenance, Hi800-A system maintenance, Hi800-E system maintenance, Hi800-M system maintenance, Hi800-D system maintenance, Hi800-S system maintenance, Hi200-S system maintenance, etc.
Chang Xiu DMG CNC Failure:
Air pressure monitoring loop, can not enter the system, X-axis alarm, can not return to the origin, oil leakage, can not be turned on, after start-up, the indicator light of the operation panel is not lit, alarm, overload, poor wiring, NC overheating, no display after start-up, vibration when axial stopping, vibration or noise caused by axial movement, abnormal spindle positioning, spindle can not rotate, tool exchange abnormality, etc.;
Changxiu DMG CNC models:
DMC-63V, DMC-70V, DMC-64V, DMC-635V, DMC-55H, DMC-75H, DMC-80U, etc.