In modern society, the location and design of homes are increasingly focusing on practicality and aesthetics. And the doorway of a residence is not only the façade of the house, but also the first line of defense for family life. So, is there any attention to the drainage at the gate?This article will answer this question for you in terms of the design of the drainage system, the principle of drainage, and how to keep the drainage system running well.
First, the design of the drainage system.
A proper drainage system can effectively prevent rainwater from accumulating and reduce the problems caused by water accumulation. Therefore, when designing the drainage system at the gate, you need to pay attention to the following points:
1.Slope: The ground at the gate should have a certain slope so that rainwater can flow smoothly into the drainage ditch. In general, the ground slope should be between 2 and 5.
2.Drainage ditch: A special drainage ditch should be set up at the gate to collect rainwater flowing from the ground, eaves, etc. The width of the gutter should be adjusted according to the actual situation, and it is generally recommended to be between 30 cm and 60 cm. In addition, the depth of the gutter should not be too shallow to prevent it from being crushed by large objects.
3.Rainwater grate: In the drainage ditch at the gate, a rainwater grate should be installed to prevent debris from clogging the drainage pipe. The size of the rainwater grate should be selected according to the width of the gutter.
Second, the principle of drainage.
The basic principle of drainage is to use gravity to make water flow down the high to the low. In the drainage system, rainwater first flows down the ground to a lower place and then into the drains. Rainwater then flows through drains to outlets and finally into sewers or rivers. In this process, if the drainage system at the gate is properly designed, rainwater can be effectively excluded and problems caused by water accumulation can be avoided.
3. Methods to keep the drainage system in good operation.
In order to maintain the proper functioning of the drainage system at the gate, we need to carry out regular inspections and maintenance. Here's how:
1.Clean the gutters: Regularly clean the gutters at the gate and remove debris and fallen leaves and other garbage to ensure smooth drainage.
2.Check the rainwater grate: Check the status of the rainwater grate regularly, and if there is damage or blockage, it should be replaced or cleaned up in time.
3.Check the drain outlet: Regularly check the sealing of the drain outlet, and if there is any water leakage, it should be repaired in time.
4.Check the slope of the ground: Make sure that the slope of the ground at the entrance meets the requirements to ensure that rainwater can flow smoothly into the drainage ditch.
In short, the drainage at the gate does have a certain degree of exquisiteness. With reasonable design and good maintenance, we can ensure the normal operation of the drainage system at the gate, bringing convenience and safety to family life.