During the operation of the vacuum rake dryer, the problem of low vacuum level is sometimes encountered. This can be caused by an unlocked inlet and outlet cap, an unpressed shaft-end packing gland, a leaking line or insufficient ultimate pressure of the vacuum pump. These problems not only affect the normal operation of equipment, but can also have a negative impact on product quality and production efficiency.
In order to solve the problem of low vacuum, we can adopt a series of practical treatment methods. First, make sure the inlet and outlet caps are locked to reduce gas leakage. Second, check and compress the packing gland at the end of the shaft to ensure a good seal. In addition, the pipeline is overhauled, and the connections of the pipeline and the pipeline itself are inspected to ensure that there are no leaks. If a leak is found, repair it promptly. Finally, the vacuum pump should be inspected and repaired, or a better performing vacuum pump should be considered.
By taking these measures, you will be able to effectively solve the problem of low vacuum level in vacuum rake dryers. This not only ensures the stable operation of the equipment, but also improves production efficiency and product quality. At the same time, we recommend that you keep in close contact with professional technicians or equipment manufacturers in order to obtain more comprehensive and professional guidance and support.