SSDs have grown particularly rapidly this year, with the affordable PCIe 40 hard drives emerge in an endless stream, and not long ago, we also launched our own cost-effective high-speed hard drive - Yingchi Xingyao 7000 Plus SSD, a PCIe 40 high-speed hard drives.
The product tested this time is Xingyao 7000 Plus SSD 1TB solid-state, at present, the solid-state has been officially launched in Yingla, the 1TB version**is 449 yuan, and the 2TB version**is 749 yuan, so if you want to know the detailed strength of this solid-state, you can use it in the following content.
1. Unboxing introduction.
The Shadow Run Xingyao 7000 Plus SSD adopts the packaging design of the new version of Xingyao Niang, and the outer packaging color is combined with powder blue, which is simple, high-end and lightweight.
The back is the highlight of the product, which supports NVME protocol, TRIM, data error correction, professional master control, etc., and also marks the interface specification of the SSD as M2 2280, and the warranty is three years of personal warranty, basically worry-free in terms of after-sales.
The full picture of the Xingyao 7000 Plus SSD product is shown in the figure, with a metal composite heat dissipation patch on the front, which effectively and quickly dissipates the heat brought by the chip when it is under high load, avoids heat accumulation, and helps the SSD performance to play stably.
Uncover the heat dissipation sticker, you can see the PS5027-E27T's main controller and two 3D NAND Flash, and Phison E27T's PCIe 4 built for 12nm0 DRAM-less SSD controller, supports up to 7400MB S, 6400MB S, 4th generation LDPC & RAID ECC error correction mechanism, supports all advanced security and encryption features (such as AES256 TCG OPAL 2.)0, etc.) supports thermal throttling, and the average power consumption is only 4About 6w.
NAND flash memory uses Kaixia's sixth-generation BICS Flash 3D flash memory, which is a 162-layer 3D TLC particle, and the continuous read and write speed of the 1TB version can reach 7000 6400MB S, and the random read and write speed is 1000K 850K IOPS. At the same time, the Xingyao 7000 PLUS also supports HMB (host memory buffering) technology and intelligent analog SLC storage strategy, which can also be used as the first choice for installation.
2. Software testing.
The first is our testbed.
CrystalDiskMark test.
CrystalDiskMark, abbreviated as CDM, is a professional disk performance testing tool used to test the read and write speed of mechanical hard disks and solid state drives, and mix random read/write, continuous transfer rate, and random 4K performance tests.
In the CDM test, the Sexually Read Speed of the 7000 Plus 1TB SSD reached 7053MB S and the sequential write speed reached 6164MB S, which has reached PCIe 40 flagship-level level, the overall read and write data is very good.
In the 16GB project, there is a slight difference in read and write performance, but in terms of sequential write speed, the speed soars to 6258MB s, which is a big improvement, and the overall performance is quite good.
txbench test.
TXBENCH is similar to CrystalDiskmark, it is also a professional disk performance testing tool, which supports free setting of the block size of the test, queue depth, etc., as well as full disk write testing, both file and RAW support.
In the TXBENCH test, the Sexually read speed of the 7000 Plus 1TB SSD reached 6914MB S, close to the level of 7000MB S, but it was still quite close to the nominal level, and the sequential write speed also reached 5908MB S.
as SSD benchmark test.
AS SSD Benchmark is a standard test program specially designed for SSD testing, which covers the test of key data such as sustained read/write, single-threaded 4KB random read/write, 64-thread 4KB random read/write, and disk seek time.
Because of the difference in software algorithms, the AS SSD is slower than the CDM, with a read and write speed of 5797 5576 MB s, and the overall score is still 9594 points, which is not bad.
anvil's Storage Utilities test.
anvil'S Storage Utilities is a disk performance test tool similar to that of an SSD, but its test items are more detailed.
In anvil'In the S Storage Utilities test, the Xingyao 7000 Plus 1TB SSD achieved a read score of 9567, a write score of 18256, and a total score of 27824.
Atto Disk Benchmarks.
The ATTO Disk Benchmark is an easy-to-use disk transfer rate detection tool that can be used to check the read and write rates of hard disks, USB sticks, memory cards, and other removable disks5K to 64MB were read and written separately, and the data was expressed in the form of a histogram after the test was completed, which well illustrated the impact of different file size ratios on disk speed.
In the ATTO test, the read and write speed of the Xingyao 7000 Plus 1TB SSD is very good, and the read speed can reach up to 658gb/s。Write speeds up to 533GB s, even in the transfer of small files and multiple files, it can still carry out fast file transfer.
HD Tune Pro test.
HD Tune Pro is a hard drive performance diagnostic test tool. HD Tune Pro can detect hard drive transfer rate, burst data transfer rate, data access time, CPU usage, health, temperature, and disk surface scanning. In addition, HD Tune Pro can also detect the firmware version, capacity, cache size, and current transfer mode of the hard drive in detail.
In the HD Tune Pro test, it can be seen that the transmission curve is very stable and smooth, without a large fluctuation curve, and a large drop, it can be said that the performance of the Xingyao 7000 Plus 1TB SSD is very stable.
Shadow Run Magic Disk Tool.
There is also an exclusive magic disk management software - Shadow Magic Disk XTREME Tuner for SSD, which can provide Sm.a.r.T information, hard disk optimization, firmware upgrade and secure erase of all data, restore the initial state and other functions. You can easily understand the lifespan and real-time temperature of the 7000 Plus 1TB SSD.
Copy-paste the test.
In the process of daily computer use, we often do a lot of copy and paste, and this depends on the read and write performance of the SSD, for which we have carried out a large file copy and paste test in the disk.
In the process of transferring 27GB archives, the speed of the hard disk is basically at a fairly smooth and fast speed, basically 3With a transfer speed of about 4GB, there is no problem with large file copies.
Summary. It can be said that the speed of the Xingyao 7000 Plus 1TB SSD is already PCIe 4Level 0, the read and write speed can reach 7000 6000MB s, and at the price of 449 yuan 1TB, it can be said that it is full of cost performance, plus the nominal 600TBW write ceiling and 3-year warranty, which is very suitable for consumers.
Of course, if you have more space needs, you can choose the 2TB version, which has more storage space, and at the same time has faster performance and speed, as PCIe 40 flagship-level level, Xingyao 7000 Plus SSD will be one of your best choices, interested players, you are also welcome to go to the official ** of Yinglax to buy