The pain point of traditional boilers - energy consumption.
1.Insufficient combustion. The traditional boiler adopts the method of natural air intake, and the oxygen content is relatively low, which cannot be fully burned and the heat energy cannot be fully released; The steam generator adopts a full premix design, and the fan is used to feed in the air, so that the air and gas are fully mixed in the venturi, the combustion is more sufficient, and the heat energy is fully released;
2.Low heat utilization. Traditional steam boilers use natural combustion and often do not have thermal insulation devices, resulting in a large amount of heat energy dissipating into the air, which is wasted in vain and reduces the heat really used for heating; The steam generator has a specially designed combustion chamber, and the pot body is added with thermal insulation materials to minimize the heat dissipated to the air;
3.Exhaust gas heat loss. The traditional steam boiler needs to discharge the exhaust gas generated by combustion, but the temperature of the exhaust gas is very high, and the direct discharge will take away a lot of heat, reducing the heat that is really used for heating; The steam generator has a special waste heat ** system, which uses flue gas to preheat the inlet water. It can not only reduce the temperature of the exhaust flue gas, but also reduce the heat waste of the flue gas;
4.Limescale wastes heat energy. With the long-term use of traditional steam boilers, thick scale will form inside the boiler, and it is very difficult to clean, which will block the heating of water by the boiler, resulting in low thermal efficiency, and it is easy to cause equipment damage after a long time; The steam generator and RO reverse osmosis equipment can avoid the problem of scale, which not only ensures the cleanliness of the steam, but also prolongs the service life of the equipment.
The use of steam generators can stably control energy consumption, ensure the normal production of the production line, and reduce the fuel cost of the enterprise, so as to reduce costs and increase efficiency for the enterprise.