Many people may not know much about the experience sharing: common problems in the use of special cutting fluid for aluminum-plastic doors and windows, and it doesn't matter if you don't know, if you want to know about it, it is recommended that you take a look at the following content.
The special cutting fluid for aluminum-plastic doors and windows is a kind of lubrication, cooling and anti-rust liquid used in the processing process of aluminum-plastic doors and windows. In the process of use, you may encounter some common problems:
1. Short service life of cutting fluid: due to the large amount of chips and waste liquid generated during the processing of aluminum-plastic doors and windows, these will pollute the cutting fluid and shorten its service life. The solution is to replace the cutting fluid regularly and make reasonable use of waste liquid resources.
2.Inaccurate amount of cutting fluid: The right amount of cutting fluid is essential to ensure the performance and process requirements of cutting fluid. Excessive addition will cause waste, and insufficient addition will lead to poor lubrication. The amount of cutting fluid should be reasonably determined according to the machining technology and machine tool performance.
3.The hardness of the cutting fluid is too large or too small: The hardness of the cutting fluid has a significant impact on the machining results. Too much hardness increases frictional resistance and the risk of surface scratches, and too little hardness can easily cause scratches and vibrations of the equipment. The hardness of the cutting fluid should be selected that is suitable for the machining requirements.
The special cutting fluid for aluminum-plastic doors and windows has the following characteristics, functions and uses:
1. Features:
a.High lubrication: It can provide good lubrication during machining, reduce cutting resistance, and prolong cutting tool life.
b.High cooling performance: The temperature of the workpiece and the tool can be quickly reduced, and the machining quality can be reduced due to overheating.
c.Good anti-rust performance: It can effectively prevent rust and corrosion of aluminum-plastic doors and windows during processing.
d.Non-corrosive: It has no corrosive effect on the surface of equipment and processed parts, protects equipment and improves machining accuracy.
e.Huankang: It does not contain harmful substances and does not pollute the operator and the environment.
2.Features:
a.Lubrication function: provide lubrication during the cutting process, reduce frictional resistance, and improve processing efficiency.
b.Cooling function: Quickly remove the heat generated during the machining process and maintain the appropriate temperature of the workpiece and tool.
c.Anti-rust function: protect the surface of the machined parts to avoid rust and corrosion.
d.Cleaning function: It can effectively clean the cutting chips and waste oil generated during the cutting process.
3.Usage:
a.Aluminum-plastic doors and windows processing: It is used for lubrication and cooling in the milling, planing, turning and other processing processes of aluminum-plastic doors and windows.
b.Metalworking: Suitable for cutting lubrication and cooling in other metalworking processes.
Through the reasonable selection and use of special cutting fluid for aluminum-plastic doors and windows, the processing efficiency can be improved, the surface of the equipment and workpieces can be protected, and the processing quality and equipment life can be prolonged.