Distributed Design DP6 is a 65-inch high-performance pendant loudspeaker designed for open or stylish spaces.
It has a strong power load capacity, extremely high sensitivity and excellent sound reproduction, making it suitable for a wide range of vocal and regenerative applications.
The DP6 is equipped with an autotransformer capable of achieving full loudspeaker output on 70V or 100V distribution lines.
Uniform tuning allows the DP6 to be used in conjunction with the in-ceiling and surface-mount loudspeakers of the Distributed Design Series without compromising zone-to-zone consistency.
True coaxial design, the high and low frequency driver unit uses an independent magnetic structure, which can effectively reduce distortion, and its sensitivity is higher than that of similar products in the industry, and the output will be 3dB to 6dB higher only by using half the power amplifier of other similar products
The combination of a tru-phase waveguide and a centrally positioned driver provides consistently wide cone coverage up to 16kHz
Community's Carbon Ring CONE technology increases the effective area of the cone, reducing distortion and enhancing the durability of the cone.
The front of the DP6 loudspeaker has an input impedance of 8 ohms or a 70V 100V toggle switch, and the integrated rear cover hides the internal wiring and internal hardware, which will make the installation more beautiful.
Accessories include: two 45 m long, 2 mm diameter, galvanized steel wire rope suspension cable with spring clamp for hanging speakers; There is also a Gripple brand clip for height-adjustable cable fixing.
Optional Accessories: 91 meter and 152 meter rigging kit, a spare gripple snap as well as a 43 meters to install auxiliary guards.
The distributed design of DP6 is powerful and versatile, whether it is used for paging broadcasts or performances, it can provide high-quality sound for retail venues, restaurants, hotels, resorts and other venues that require sound quality.
Building Specifications This loudspeaker system is a two-way, full-range ceiling-mounted loudspeaker with a 6The 5-inch LF driver and Carbon Ring Cone technology are available, as well as the coaxially mounted 1-inch open HF compression driver.
The driver is connected to a crossover, and the crossover frequency is 12kHz, there is also a fail-safe circuit breaker to protect the drive.
The amplitude of this system is 80Hz to 20kHz (+-5dB) and the low impedance (8 ohms) input capability is 28V rmsThe sensitivity at 1W 1m is 93dB (125Hz to 12.).5kHz, 1 3 octaves).
From 500kHz to 6kHz, the loudspeaker system produces a cone with a wide coverage of 115o
The nominal system impedance is 8 ohms (in low impedance settings).
The cabinets and bezels are coated and constructed of UL 94V-0 ABS plastic, including dual powder-coated steel grilles.
This system is equipped with a 60W high-performance autotransformer at 70It can be used in 7V or 100V distributed audio systems, and 70 moreAvailable in 7V distribution systems with 60W, 30W, 15W and 75W tap (60W, 30W, 15W tap available in 100V distribution system).
The front bezel features a front-tap toggle switch hidden in a removable grille, allowing for a choice of autotransformers and low-impedance settings.
This system consists of two 45 m long, 2 mm diameter galvanized steel wire rope suspension cables, one of which is used to hang the speakers and the other is for the safety of the cable; There's also a Gripple-branded height-adjustable cable fastener, a spring clip that connects the cable to the speaker bracket, and an integrated rear cover that hides internal wiring and hardware.
The diameter of the loudspeaker system is 1122 inches (285mm), the cabinet height should be 14732 inches (374.)2mm), the weight is 118lbs（5.4kg）
The system is ETL certified to UL1480 and CSA60065 standards.
Characteristics Modern and fashionable design
The Distributed Ceiling, Surface Mount loudspeaker series uses the same originals and tuning
Provides consistent, broad distribution probabilities up to 16kHz
True coaxial loudspeaker with high-frequency compression drivers
Tru-Phase high-frequency waveguides
Carbon Ring Cone Technology
High performance, high output, high definition, low distortion
The shell can be painted, and the impact-resistant high-density ABS plastic box reduces resonance
8 ohm or 70v 100v toggle tap switch
The integrated back cover hides the internal wiring and internal hardware
All-weather system, the drive unit is treated, two layers of powder-coated grille
ETL certified to UL1480 compliant
Available in standard black and white
Specifications Speaker type: two-way, full-range, coaxial pendant mounted loudspeaker, 8 ohms or 70V 100V
Operating range: 65Hz-22kHz
Frequency response: 80Hz-20kHz (5dB).
Output level (8 ohms): 100W continuous, 250W program
28V RMS, 63V instantaneous peak
Transformer tap -70V: 60W, 30W, 15W, 75W and low impedance
100v：60w, 30w, 15w
Distortion - 10% total power: 2nd harmonic 3rd harmonic
500hz: 1.74% 1.19%
2 khz: 1.18% 0.35%
8khz: 0.77% 0.04%
Sensitivity (1W 1m): 94 dB SPL (125 Hz to 12.)5kHz, 1 3 octaves).
92 dB SPL (250 Hz to 4 kHz sound range).
Output: 114 dB SPL 120 dB SPL (8 ohms peak).
Nominal impedance: 8 ohms
Small impedance: 69 ohms @ 210 Hz
Nominal coverage: 115 o conical (1Hz to 6kHz).
125 O conical (500Hz to 6kHz).
Axial q value di: 47 / 6.7, 500 Hz to 6 kHz
Crossover frequency: 12 khz
Recommended signal processing: 60Hz high-pass filter
Drive: LF 1x 65-inch, high-frequency 1 x 1-inch open compression driver
Drive protection: self-centering circuit breaker
Input interface: 2 x 2-position Phoenix connectors
Control: Surface Power Low Impedance Connector Switch
Cabinet: UL 94V-0 ABS plastic, matte coating, paintable
Coating: black or white
Installation Equipment Regulations: Two PHK-15 Rigging Kits (one for the main suspension and one for the safety of the cable), including two 45 m long, 2 mm diameter galvanized steel wire rope suspension cable with spring clip for hanging loudspeakers; There is also a Gripple brand clip for height-adjustable cable fixing.
Grille: Powder-coated steel safety cable, coated in black or white, can be painted
Baffle: Reflective load UL 94V-0 ABS
Safety features: safety cable included.
Each cable weighs 99lbs (45kg).
Safety certification: ETL certified, in accordance with UL1480 and CSA60065
The suspension system and Gripple brand buckles are also listed in UL1598 and UL2239, TUV and CSA Class 3426-01 and Class 3426-81
Accessories required: Electronic high-pass filter
Accessories Included: 2 x PHK-15 Rigging Kits; 1 x ABS plastic back cover; 1 rear cover inlet weatherproof
Optional accessory: PHK-30 Rigging Kit (30 ft 9.)1 m).
PHK-30 Rigging Kit (50 ft 15.)2 meters).
PSC spare GRIPPLE snap
PST-14 Installation Auxiliary Guard Pipe (4.)3 meters).
Size-Height: Box 14732 inches (374.)2mm) high
Diameter: Surface diameter 1122" (285mm).
Weight: 118lbs(5.4kg)