How to remove burrs from a fully threaded stud, here are some commonly used methods:
2024 Travel Guide 1Deburring by hand: Using tools such as sandpaper, files, or scrapers, the burrs on the fully threaded studs are smoothed or scraped by hand. Although this method is more time-consuming, it is very practical for some small-scale production or maintenance.
2.Use a grinder to remove burrs: Place a fully threaded stud on a grinder and use the high-speed rotation of the grinder and the grinding action of the grinding wheel to smooth out the burrs. This method is more efficient, but requires specialized equipment and operators.
3.Use ultrasonic to remove burrs: Use the vibration of ultrasonic waves to loosen the burrs on the fully threaded studs, and then rinse them with clean water. This method is suitable for removing small, thin burrs, but may not work well for large, thick burrs.
4.Use pickling to remove burrs: Place the fully threaded studs in the pickling solution and use the chemical dissolution of the acid to dissolve the burrs. This method is more efficient, but it is necessary to control the concentration and temperature of the pickling solution, and at the same time, it is also necessary to pay attention to the effect of the pickling solution on the whole threaded stud itself.