The rate of temperature change in the chamber can usually be adjusted by the control system. The specific adjustment method may vary depending on the device model and manufacturer, but the following are the most common adjustment methods:
Set the temperature change range: Start by determining the desired temperature change range for the test, e.g. from -40 to +85.
Select the appropriate temperature change rate: According to the test requirements, select the appropriate heating or cooling rate within the range allowed by the equipment. Generally speaking, the rapid temperature change test chamber has a fast temperature change rate, which can reach several degrees or even more than ten degrees per minute.
Set temperature hold time: At each temperature point, a certain hold time can be set to ensure that the stable performance of the product at that temperature is fully evaluated and tested.
Automatic or manual control: Some high-end rapid temperature change test chambers are equipped with automatic control systems, which can automatically adjust the temperature change speed according to the set parameters. Some simple devices may require manual operation of buttons or knobs on the control panel to adjust the ramp rate.
It should be noted that when adjusting the temperature change rate of the rapid temperature change test chamber, the instructions for use and safety specifications of the equipment should be followed to ensure the safety and reliability of the test process. In addition, the equipment should be regularly maintained and calibrated to maintain its good working condition and accuracy.
The above information is for reference only, and the specific adjustment method may vary depending on the model or brand of the test chamber. It is recommended to consult the instruction manual of the test chamber or contact the test chamber manufacturer for accurate information.
If you need to know the relevant parameters, specifications and models of the test equipment, you can visit the official website of "Guangdong Bell" and consult relevant technical personnel.
Rapid temperature change test chamber