The installation method of the screw grouting machine is as follows: 1. Preparation 11. Determine the installation location: Choose a flat and stable ground as the installation location, and make sure that there are no other equipment or items near the location to hinder the installation.
1.2. Clean up the installation location: Clean the installation position to ensure that the ground is clean and free of debris.
1.3. Check the power supply: Check the power supply near the installation location to ensure that there is a stable power supply.
2. Install the screw grouting machine 21. Install the fixed base: Place the fixed base of the screw grouting machine on the installation position to ensure that the base is horizontal and stable.
2.2. Install the screw machine: install the screw machine on the fixed base to ensure that the screw machine is firmly connected to the base.
2.3. Connect the power supply: connect the power cord of the screw grouting machine to the power socket, and confirm that the power cord is connected correctly and firmly.
3. Connect the grouting pipeline 31. Prepare the grouting pipeline: according to the need, prepare the grouting pipe of the appropriate length.
3.2. Connect the grouting inlet: connect the grouting pipe at one end to the grouting inlet of the screw grouting machine, make sure that the connection is tight, and use a wrench to fix the interface.
3.3. Connect the grouting outlet: Connect the grouting pipe at the other end to the grouting outlet at the position where the grouting needs to be filled, make sure the connection is tight, and use a wrench to fix the interface.
Fourth, check the installation situation 41. Fixed screw grouting machine: check the fixing of the screw grouting machine to ensure that the base and the screw machine are connected and tightened.
4.2. Check the power connection: confirm that the power cord of the screw grouting machine is firmly connected and plugged into the power socket.
4.3. Check the pipeline connection: check the connection between the grouting inlet and outlet of the screw grouting machine and the grouting pipe to ensure that it is tightly connected and not loose.
5. Open the screw grouting machine 51. Turn on the power supply: Turn on the power switch of the screw grouting machine to ensure the stable power supply.
5.2. Set parameters: according to the need, set the parameters of the screw grouting machine, such as grouting pressure, grouting speed, etc.
5.3. Turn on the machine: press the start button to turn on the screw grouting machine and start working.
6. Safety precautions 61. Please use professional installation: In order to ensure correct installation and operation, it is recommended that the installation of the screw grouting all-in-one machine be carried out by professionals.
6.2. Pay attention to power safety: Please ensure that the power supply connection of the screw grouting machine is correct and stable, and avoid damage to the power cord due to strong tension and bending.
6.3. Pay attention to safety protection: When operating, please wear relevant safety protection equipment, such as gloves, safety glasses, etc.
Through the above steps, the screw grouting machine can be installed correctly and start to use.
I hope the content of this article can help you to better understand and master the installation method of screw grouting machine.