Type B optical pipe radiator is a kind of high-efficiency, energy-saving and environmentally friendly heat dissipation equipment, which is named because it uses optical pipe as a heat transfer element. The B-type light pipe radiator usually uses hot water or steam as the heat transfer medium, and heats the water or steam in the heat pipe through circulation, so that the heat pipe is heated and the heat is transferred to the surface of the radiator, and then the heat is dissipated to the room through the surface of the radiator.
There are usually three installation methods for B-type optical pipe radiators: wall-mounted installation, floor-mounted installation and bracket installation.
Wall-mounted installation is an installation method in which the radiator is hung on the wall, which is suitable for occasions with sufficient support capacity on the wall. When installing, you need to fix the hook of the radiator on the wall, and then hang the radiator on it. This installation method is simple and convenient, and does not affect the use of indoor space.
Floor mounting is to place the radiator on the ground, which is suitable for occasions where the ground is flat and the weight capacity is sufficient. When installing, you need to fix the legs of the radiator on the ground, make sure that the legs are in good contact with the ground, and then place the radiator on the legs. This installation makes it easy to clean and maintain the radiator.
Bracket installation is to set up a bracket on the wall, and install the radiator on the bracket, which is suitable for occasions that cannot bear weight on the wall but needs to be suspended for installation. When installing, you need to make a bracket first, then fix the bracket on the wall, and finally install the radiator on the bracket. This installation makes the best use of space and improves heat dissipation.
The above are the three installation methods of B-type optical pipe radiator, and the specific installation method needs to be selected according to the actual situation. At the same time, it is necessary to pay attention to safety issues during the installation process to ensure that the installation is firm and reliable to avoid safety accidents.