Fast Technology Las Vegas, January 10: During the CES 2024 exhibition, Lexar brought a wealth of storage solutions, covering SSDs, memory, memory cards, etc., including the top-of-the-line PCIe 50 SSD, DDR5 high-frequency memory.
Let's take a look:
SSD offerings are the most abundant, including the upcoming launch of Lexar's first PCIe 50 SSD NM1090, which is also the first four-digit model in the Lexar NM series, has been shown many times before, but it was still a sample at the time, and now it has been finalized.
It uses the popular Phison E26 main controller, with Micron 232-layer stacked TLC flash memory, with a capacity of 1 2 4TB, supports SLC dynamic cache, and sequential read and write speeds of up to 12GB S and 10GB S.
In order to control the heat generation and ensure stable operation, it also uses an active cooling solution, with a small fan placed in the middle of the huge heat sink.
NM800 Pro, top-of-the-line PCIe 40 SSD, sequential read/write up to 75gb/s、6.5GB s, the capacity was previously 1 2TB, and will be increased by 4 8TB in the future.
Heatsinks can be available or without, and if the motherboard comes with a heatsink or is used for a notebook, the latter is suitable.
The NM790 is not a new product, but it is one of Lexar's most popular and well-received SSDs of 2023, winning multiple awards.
It uses a single-sided design, which is thinner and lighter, and can be easily used in compact notebooks, with a capacity of 512GB without a heatsink, 1 2 4TB, and the temperature is still well controlled, and it is compatible with PS5 even with a heatsink and a capacity of 1 2 4TB.
Play 2230, a relatively rare m2 The 2230 is a compact product that can be used in very space-constrained handhelds such as Steam Deck and ROG Ally.
The performance is still good, with a capacity of 1TB, support for SLC dynamic caching, and a sequential read and write of up to 52gb/s、4.7gb/s。
In terms of portable mobile SSDs, Lexar also has a wealth of products, with full coverage of high, medium and low ends.
The upcoming top-of-the-line model, the Armor 700, is so thin and light that it can even be hung on the back of a mobile phone, and has three rugged features, such as IP66 waterproof and dustproof, and a 3-meter drop.
1 2 4TB capacity, USB 3The 2 Gen2X2 main control solution can run up to 2GB s at a maximum read and write speed, and supports shooting 6K RAW ultra-clear and original** recording.
The SL600 comes with a handle, which can be easily hung on a backpack and is more portable.
High-grade aluminum shell, sandblasted surface, better protection, can withstand shock and impact.
The performance is not weak in any way, 1 2 4TB capacity, USB 32 Gen2x2, 2GB s read and write.
SL500, also the first model, is positioned as the mainstream, more thin and portable, and is compatible with various devices such as notebooks, mobile phones, cameras, and handhelds.
The read and write speed is up to 2GB s, 15GB s, you can shoot 4K60 HD with iPhone 15 Pro series**.
SL660 Blaze, in fact, is another version of SL600, aimed at gamers, with RGB lighting effects added to the handle, but the capacity is smaller, only 512GB, 1TB.
Play MicroSDXC memory card, suitable for gaming handheld expansion, capacity can be selected 128 256 512GB, 1TB, interface specification supports UHS-i, maximum read and write speed of 120MB S, 100MB S.
In terms of memory, a new top-of-the-line ARES DDR5 memory is being prepared, named after God of War.
Among them, the top has redesigned a new version of the shape, an aluminum heat dissipation vest, which supports RGB lighting effect synchronization and can be linked with the motherboards of the four major brands.
The frequency can reach up to 8400MHz, the timing is still controlled at CL40-52-52-134, and the voltage is 14v。
At the same time, there is 8000MHz, the timing is slightly relaxed to CL40-48-48-128, and the voltage is also reduced to 135v。
However, only Intel XMP 3 is currently supported0, single capacity 16GB, 24GB.
The old model below has a maximum frequency of 7200MHz, timing CL34-42-42-84, and optional 6800 6400 6000 5600MHz, which supports Intel XMP 30、amd expo。
Thor DDR5, named after Thor, is also quite Thor's style in terms of styling.
A 6400MHz high-frequency version will be added, with timing CL32-38-38-76 and a voltage of 14V, also optional 6000 5600MHz, support Intel XMP 30、amd expo。
Finally, there are various memory cards and card readers, and the models are extremely rich, so I will not introduce them one by one.