1. The shearing machine blade made of T10 (carbon tool steel) and CR5MO (chromium-molybdenum alloy steel CRSI (low-alloy tool steel) used in high-temperature environment is suitable for shearing ordinary A3 and ordinary low-carbon cold-rolled plates and scraps; In addition, shears blades made of 9Crsi (Low Alloy Tool Steel) are also suitable for cutting harder, thin steel plates.
2. Shearing machine blade material: generally there are 4 kinds: 9CrSicrW2SicrMov, H19CrSi: The hardness of the blade of the shearing machine is generally in the range of HRC57-59, and the ordinary A3 plate is sheared. 6CRW2SI: Can cut ordinary A3 sheet and stainless steel.
3. Shearing machine blade material: There are generally 4 kinds: 9CrSicrW2SicrMov, H19CrSi: The hardness of the blade of the shearing machine is generally in the range of HRC57-59, and the ordinary A3 plate is sheared. 6CRW2SI: Can cut ordinary A3 sheet and stainless steel. The company's (Anhui Donghai Machine Tool) shearing machine is equipped with this material blade as standard.
4. What is the best material for the blade of the shearing machine? Steel for measuring and cutting tools is a commonly used low-alloy tool steel with high hardenability and hardenability, as well as high tempering stability. It can be used to manufacture shearing machine blades with complex shapes, small deformation, high wear resistance and low-speed cutting. It is suitable for cutting ordinary A3 board and Q235 board.
1. H1 American Fincola H12 (AISI) hot work die steel: high temperature wear resistance.
H12 is an air-cooled hardened hot work die steel with good hardenability, good thermal strength, oxidation resistance, high toughness and wear resistance at medium temperature, and good cold and heat fatigue resistance, processability, heat treatment performance and polishing performance.
CR5W2VSI (H1 is a high-speed tool steel, also known as X40CrMoV5-1 or 2344. It is a steel grade with good heat resistance and excellent mechanical properties, which belongs to quenched and quenched section steel. The material is mainly used in the manufacture of needles, molds, cutting tools and other parts used at high temperatures.
3. H12 pure original means high imitation of shoes, which is often referred to as fake. This concept was proposed by a manufacturer of fake shoes in Putian, but the fact that these shoes are fake shoes cannot be concealed. In general, there is not much difference between H12 pure original shoes and **, and there is no way to distinguish the authenticity with the general identification method.
4. What is H12? H12 is a die steel with good heat resistance and high strength. Its characteristics include high wear resistance, high toughness, good thermal fatigue properties, excellent comprehensive mechanical properties and high tempering stability.
5. AISI H12 tool steel is a general purpose hot work steel with a chromium content of 75 5%. The vanadium content of H12 tool steel is 8 2% less than that of the widely used H2 hot work tool steel). ASTM AISI H12 steel is a deep-hardened, air-hardened steel with minimal dimensional variation during heat treatment.
6. Dear, hello, I am glad to answer the difference between H12 and H13 steel chemical composition comparison is the American Fencola H12 (AISI) hot work die steel, similar to 3Cr5WMOVSI steel to improve the high temperature wear resistance of H13. H13 is a hot work die steel grade in the United States, corresponding to the domestic die steel grade of 4Cr5MOSIV1.