What are the components of the electric furnace body?
The furnace body is generally divided into two parts: the upper furnace body and the lower furnace body. The whole electric furnace can be divided into furnace body and furnace cover. What are the components of the upper and lower furnace bodies of the electric furnace boiler?
Furnace cover: When the temperature in the heat exchanger is adjusted to a certain value, it reaches the specified temperature control range. Its working principle is to use the high-temperature action of steam in the combustion chamber to discharge waste and fuel from the furnace body, so as to generate energy and provide heat to the surrounding environment; The cooled gas and air are heat-treated through a condenser in the circulation tube and then sent to the next stage.
The results of the hydraulic calculations can reflect the change in the concentration of solids in the water (as shown in Figure 4-17). When the flow rate of hydrogen exceeds 2MPa m3, it will cause system failure or failure or affect the operation quality, so it is necessary to consider the influence of these factors and the requirements for operators. Understanding this requires identifying specific processes in order to better understand the design, avoid errors, increase efficiency, reduce energy waste, and reduce investment costs.
The motor power is generally less than 100kw, but the energy consumption of the generator set is high, so for the motor under low voltage conditions, it is necessary to adopt high-efficiency and energy-saving technology, that is, control technology to optimize the design and improve the performance of the equipment, to ensure the normal use of the electrical system. Due to the different types, the electricity consumption generated in practical applications is also different, such as the electricity price of thermal power plants, the increase in gas production, the increase in wind speed, etc., but at the same time, it is necessary to decide whether stable economy can be achieved according to the change of the user's production capacity. Chemistry focuses on how to prevent leakage in the hydraulic system and achieve accurate diagnosis and failure of the hydraulic system, and the Baros Super Multi-pass Block and Visual Liquefaction Line System can improve the stability of the system and effectively avoid unexpected failures. Provide comprehensive emergency treatment solutions for on-site treatment of products and emergency treatment of sudden hazardous chemical leakage.