Floor heating has been very common in life, but because floor heating is a hidden project in the decoration, the probability of stepping on the pit is also relatively large.
First of all, it is necessary to figure out which nodes are needed to get a perfect underfloor heating system
1. Design the floor heating scheme according to the site and decoration layout;
2. Confirm the plan, material configuration, contract, etc. with the HVAC company;
3. Technical disclosure;
4. Auxiliary materials enter the site and are accepted;
5. Construction of floor heating ground;
6. Stress test;
7. Acceptance of floor heating concealment project;
8. concrete leveling;
9. Host installation and commissioning;
10. Floor heating start-up test;
11. Install the control system and debug it;
12. Enter the normal after-sales maintenance period.
It is also important to emphasize thatBe sure to choose a reliable HVAC company!
What do I need to pay attention to when installing underfloor heating?
Before installation: clean the site, waterproof the bathroom and do a closed water test.
Thermal insulation board: There is no need to lay floor heating under the cabinet, but it is best to put a thermal insulation board to improve the thermal insulation effect.
Please have an experienced professional decoration company to design and construct to ensure the effect and quality of construction, only the floor heating is installed, the heating effect will be better, and the comfort of the family can be guaranteed.
Flooring materials
Flooring
Advantages of flooring: good foot feeling, strong constant temperature.
Disadvantages of flooring: slow heat conduction but slow heat dissipation; If the environmental protection of the floor is not up to standard, toxic gases will be released in the later stage.
Paving tiles
Advantages of floor tiles: fast heat conduction but fast cooling; At the same temperature, it will feel warmer than the floor tiles; It's easier to take care of.
Disadvantages of floor tiles: It usually feels cold
Water underfloor heatingwithElectric underfloor heatingHow to choose
Floor heating is divided into water floor heating and electric floor heating, the water pipe is thicker, and the cable is thinner.
Electric underfloor heating = cable 1cm + insulation layer 2cm + control system (panel).
Water underfloor heating = heat source + pipe 2cm 19cm/2.3cm+ insulation, 3cm+ control system (panel).
From the perspective of the height of the occupied floor, electric floor heating has more advantages, and it only takes 3cm to not pave the backfill layer; And water underfloor heating needs at least 5cm.
Water floor heating is suitable for central heating, which is the most cost-effective for central heating to floor heating; If there are people at home for a long time, self-heating can also consider plumbing, which is not very wasteful if it is turned on and off;
Electric underfloor heating heats up quickly, suitable for 9-to-5 office workers; If there is a tiered electricity price subsidy policy in various places, it is also cost-effective to use electric floor heating for small households.
I hope that you can buy and install floor heating with peace of mind, rest assured, and enjoy the comfortable life brought by floor heating, and spend every winter healthily and happily.