VibrationVibration detectorAs a commonly used equipment condition monitoring tool, it is widely used in various industrial fields. However, there are some common malfunctions that can occur with vibration detectors during use. The following are the common faults of vibration detectors and their solutions: 1Won't turn on: First check if the power cord is in good contact, if the fuse is blown, and if the power switch is on. If everything is in order, it may be that the internal circuit of the instrument is faulty and needs further inspection and repair.
2.Unable to receive a signal: Check that the sensor is installed correctly, that the cables are in good contact, and that the sensor is not damaged. If both the sensor and the cable are normal, it is possible that the signal receiving part inside the instrument is faulty and needs to be serviced.
3.Unable to display signal: Check if the display has power, if the cable is in good contact, and if the display is damaged. If both the display and the cables are normal, it is possible that the signal processing part inside the instrument is faulty and needs to be serviced.
4.Unable to record signal: Check if the storage device is working properly, if the connection cables are in good contact, and if the storage device is full. If both the storage device and the cable are normal, it is possible that the signal recording part inside the instrument is faulty and needs to be serviced.
5.Inaccurate measurement results: This can be due to sensor failure, poor line contact, improper instrument calibration, etc. First, check whether the sensor and line are normal, and then re-calibrate the operation to ensure the accuracy of the measurement results.
6.Faulty internal circuitry of the instrument: If the instrument does not turn on properly, displays, records, or the measurement results are inaccurate, it may be that the internal circuit of the instrument is faulty. At this time, it is necessary to seek the help of professional technicians for maintenance.
In addition to the above common faults, there are other problems that may occur during use. In order to maintain the proper operation and accuracy of the vibration detector, it is recommended to perform regular maintenance and calibration, and to follow the instructions for use of the instrument. At the same time, users should have basic technical knowledge and experience so that they can make preliminary judgments and deal with failures. For more complex problems or when professional maintenance is required, you should seek the help of professional technicians.