A construction site vehicle washing station is a facility used to clean trucks, engineering vehicles and other vehicles, usually set up at the entrance of the construction site. It can effectively prevent the vehicle from driving the body and the dirt and dust around the body from entering the construction site.
A vehicle washbasin typically consists of a countertop (e.g. marble or concrete) and supporting facilities such as drainage, grease separation, and lighting. On the countertop, there are usually multiple sprinkler heads to facilitate the all-round flushing of the vehicle. At the same time, the vehicle washing table should also be equipped with adequate drainage ditches and sewer systems to ensure that the flushing water can be discharged in time to prevent the impact of stagnant water on the environment.
Before using a vehicle washer, make sure that the vehicle is cleaned, especially the body and tyres. Before entering the construction site, trucks, engineering vehicles and other vehicles must be cleaned by the vehicle washing station to ensure that the body is clean and prevent impurities such as dirt and dust from being introduced. This reduces the amount of dust from the construction site.
In addition, it should be noted that the vehicle washing station should be regularly inspected and maintained to ensure its proper operation. If there is a failure or the cleaning effect is not good, it should be repaired and replaced in time to ensure the effectiveness of the washing table.