1. Installation environment and preparation.
First of all, we need to choose a suitable location to install the license plate recognition machine. In order to ensure a good shooting effect, you should try to choose a place with sufficient light and an open field of view to avoid reflections, shadows, etc. In addition, the tools and materials required for the installation need to be prepared, such as screwdrivers, brackets, screws, etc.
Second, the installation steps.
1.Hold the all-in-one in the selected position and make sure it is stable. If you need to install it on the wall, you need to make the fixing screws in advance to prevent the all-in-one machine from falling off.
2.Connect the power cord of the all-in-one to make sure it is powered on properly. At the same time, check whether the exhaust outlet of the all-in-one machine is unobstructed to prevent the machine from overheating due to the blockage of the exhaust outlet.
3.Adjust the angle and height of the all-in-one to capture the best license plate capture angle. The best shooting results can be achieved by rotating or lifting the all-in-one machine.
4.Connect the cable between the camera and the all-in-one machine to ensure that the signal transmission is normal. At the same time, it is necessary to check whether the quality and length of the ** cable meet the requirements to avoid problems in picture transmission caused by poor cable quality.
5.Perform software settings on the all-in-one machine, including network settings, IP address settings, etc., to ensure that it can communicate normally with the background management system. In addition, it is also necessary to set the parameters of license plate recognition, such as license plate color, size, etc., so that the all-in-one machine can accurately identify the license plate information.
6.After completing the above steps, the all-in-one needs to be tested to check if it can work properly and accurately recognize the license plate. Tests can be carried out on actual vehicles, the recognition results are recorded and the relevant parameters are adjusted to achieve the best recognition results.
3. Precautions.
1.During installation, care should be taken to protect the screen and other vulnerable parts of the all-in-one to avoid damage caused by improper operation.
2.When adjusting the angle and height of the all-in-one machine, it should be kept as horizontal as possible to ensure that the captured license plate image is clear and distortion-free.
3.When setting up the software, you should follow the manual or relevant instructions to avoid the all-in-one machine not working normally due to setting errors.
4.During the test, different types of license plates and different light conditions should be covered as much as possible to verify the recognition ability and scope of the all-in-one machine.
5.If you encounter problems during installation or use, you can refer to the manual or contact the manufacturer or professional and technical personnel to solve them.