Safety light curtains are widely used in a wide range of industrial machinery and equipment. Safety light curtains can effectively avoid and prevent the occurrence of dangerous accidents. When using safety light curtains, it is necessary to follow the corresponding steps for installation and use to ensure the normal use and service life of safety light curtains, and effectively improve work efficiency. Let's talk about the installation requirements of safety light curtains today:
Install the safety light curtain 1Depending on the type of equipment and protection requirements, the appropriate type of safety light curtain is determined to ensure that personnel or equipment can be effectively protected.
2.According to the requirements of the equipment, the actual operation method of the staff and the model of the grating, determine the appropriate installation position, so as not to affect the production efficiency due to improper installation position.
3.The general safety light curtain product manual will explain the assembly steps of the product and the bracket, which must be installed in strict accordance with the safety light curtain product manual.
4.Drill holes in the identified installation locations to secure the safety light curtains. When installing light curtains on some machines and equipment, due to the unreasonable position of the holes, it will affect the work of workers or scratch the safety light barriers.
5.Carefully complete the wiring operation of the transmitter, receiver or controller, and confirm the normal use of the equipment to avoid damage to the equipment and grating due to wiring errors.
6.Debug the safety light curtain so that the transmitter and receiver are on the same level. Check that each beam is valid.
7.Once the safety light curtain has been installed, the device can be powered on and tested to further verify the protective effect of the light curtain.