Just after the floor tiles are laid, you need to pay attention to the following details to ensure the construction quality and the stability of the floor tiles:
1. Reduce walking and stampede:Immediately after the tiles are laid, it is necessary to wait for a certain amount of time (usually more than 24 hours) for the binder to dry and cure sufficiently, during which time try to avoid walking or applying heavy pressure.
2. Keep it dry:After the floor tiles are just paved, it is necessary to ensure that the paving area is kept dry to avoid moisture invading the binder and affecting the curing effect.
3. Avoid strong winds and direct sunlightAvoid allowing strong winds or direct sunlight to act directly on the paving area for the first few days after the tiles are laid to prevent the binder from drying out too quickly or cracking.
4. Keep ventilation:Keeping the application area well ventilated will help promote the drying and curing of the binder.
5. Clean up the excess glue in timeAfter the floor tile is paved, clean up the excess adhesive in time to avoid its solidification on the surface of the tile and affect the appearance.
6. Check the quality of floor tilesAfter completion, check the flatness of the floor tiles, whether the gaps are even, and whether there are hollows or damages, and repair or deal with them in time.
7. Reserve expansion jointsAccording to the construction requirements, reserve suitable expansion joints to avoid cracking of floor tiles caused by temperature changes.
8. Pay attention to cleaning:After the paving is completed, pay attention to keeping the construction area clean to avoid the accumulation of debris affecting the appearance and use.
The above details are to ensure the quality of floor tile construction and the safety and stability of future use, and paying attention to these details can effectively reduce the problems that may arise during the construction process.