A surface cooler is a device used to lower the temperature in an indoor room and is usually installed in an air conditioning system. The steps to install the table cooler are as follows:
1.Determine the installation location: First, you need to determine the installation location of the surface cooler. The surface cooler is usually installed at the return air outlet of the indoor unit or near the condenser of the outdoor unit.
2.Mounting bracket: After determining the installation position, you need to install the bracket. The bracket is usually made of metal and can hold the position of the surface cooler and the indoor unit.
3.Install the surface cooler: Install the surface cooler on the bracket according to the installation method in the manual. When installing, you need to pay attention to the installation direction and height of the surface cooler.
4.Connect the pipe: Connect the connection pipe between the surface cooler and the indoor unit. The connecting pipes should have sufficient length and bend to ensure the refrigeration effect.
5.Test effect: After the installation is completed, the cooling effect of the surface cooler needs to be tested. Turn on the air conditioner switch and observe the temperature and pressure of the surface cooler to ensure that the cooling effect is good.
In summary, the installation steps of the surface cooler include determining the installation location, installing the bracket, installing the surface cooler, connecting the pipes, and testing the effect. During the installation process, it is necessary to pay attention to the installation direction and height of the surface cooler, as well as the length and bending of the connecting pipe to ensure the refrigeration effect and safety.