When installing the SRL-10X7 3 air heat exchanger, you can refer to the following steps:
1.Location: Holes are made in predetermined locations to facilitate equipment placement and maintenance. Considering safety and efficiency, it is good to carry out the drilling and drilling operation under the guidance of people.
2.Placement Components: Assemble finned tube heating elements with the frame to form heat dissipation components (also called air heat exchangers). Take care to keep a certain amount of spacing to ensure good ventilation and avoid jamming the fan blades.
3.Unit hoisting: Connect the fan with the duct with a hook to bend into any shape according to the need, and hang it on the roof with a wire rope. (Please be sure to follow the instructions in the product manual). If it is installed outdoors, it is also necessary to consider the issue of waterproof and rainproof.
4 .Check and confirm that all parts are secured and that there are no air leaks in the individual interfaces.
5.Debugging and running to check whether there are other problems such as abnormal noise.
The above content is for reference only, it is recommended to find a decoration master for consultation. The above is the introduction of how to install the SRL-10X7 3 air heat exchanger correctly, I hope it will help you!