A surface cooler for pharmaceutical factories is a kind of equipment used for air treatment, which can realize the functions of refrigeration, dehumidification and ventilation of indoor air. The installation steps are as follows:
Preparation: Before installation, it is necessary to determine the model, specification and size of the surface cooler, and prepare the corresponding installation tools and materials.
Installation foundation: According to the size and weight of the surface cooler, make the corresponding installation foundation. The foundation should be flat and solid enough to withstand the weight of the equipment and vibrations during operation.
Install the surface cooler: Place the surface cooler on the mounting foundation, adjust its position and angle, ensure that the device is vertical and horizontal, and fix it with the corresponding fixings.
Connect the piping and electrical system: According to the design requirements, connect the inlet and outlet pipes of the meter cooler and the electrical system to ensure the normal operation of the equipment.
Commissioning and acceptance: After the installation is completed, the surface cooler should be debugged to check its operation status and refrigeration effect. If there is a problem, adjust and fix it in time. , carry out acceptance and go through relevant procedures.
In short, the installation of surface coolers for pharmaceutical factories needs to follow the corresponding specifications and requirements to ensure that the equipment is firmly installed, the pipeline connection is smooth, and the electrical system is applied. At the same time, pay attention to protect the surface cooler during the installation process to avoid damage.