Keywords:Belt scratches, deep belt scratches, belt scratches are treated quickly, and belt scratches are repaired without disassembly
In the process of conveyor belt operation, the belt is often scratched and damaged due to the scratching of the guide channel steel plate or cleaner, belt deviation, material collision and other reasons. If it is not repaired in time, it is easy for the belt to be damaged and expanded, causing potential safety hazards to the entire conveying system. Repair the belt in time, which is not only easy to repair and process, but also will not affect the start-up use. Specifically, how to deal with belt scratches?
In fact, the treatment is very simple, the choice of Soray carbon nanopolymer material technology can achieve the best repair and can be completed within eight hours of repair work, let's take a look at how to repair belt scratches using this technology through a case!
A company mine 5KMB1000 conveyor belt scratched, due to the fast running speed, when it was found, it had been scratched more than 200 meters, and now the scratch position is in the center and longitudinal, the scratch depth is 5mm (not penetrated), and the scratch length is about 200m.
Repair belt scratch process
1) After arriving at the scene, check the wear of the belt, the scratch position is located on the front of the belt, and the space directly above the belt is limited, so it can only be repaired by crawling on it, which undoubtedly increases the difficulty of repair;
2) Polishing the scratched part with a barbed wheel first;
3) **Drill to remove the materials and foreign objects inside the scratched trench;
4) Then use a blow gun to blow away the polished rubber debris and foreign matter, and finally clean it with absolute ethanol
5) Use a brush dipped in SD4001 to coat the repaired surface;
6) Put the Soray rubber repair material SD4443 on the glue gun, and squeeze it on the scratch crack
7) Use a scraper to scrape the extruded material flat
8) The material can be cured for two hours and then the machine can be started with the material.